Overview
The Pro Comp ES9000 Series front shock absorber, part number 914014, fits 1986 to 1995 Toyota 4Runner and 1986 to 1995 Toyota pickup models. It measures 13.96 inch extended and 9.25 inch collapsed, which gives 4.71 inch of travel, and it is rated for 0 to 1 in. of lift.
The shock has a stem upper mount and a loop lower mount. It is a twin-tube, gas-charged design with 10-stage velocity-sensitive valving and a nylon-banded piston head. The valving suits highway driving and helps off road.
Key features
- 10-stage velocity-sensitive valving.
- A nylon-banded piston head.
- Double-welded shock mounts.
- Stem upper mount and loop lower mount.
- Rated for 0 to 1 in. of lift.
Stem and loop mounts explained
A stem upper mount threads or bolts into the body through a fixed stud, while a loop lower mount uses an eye that pivots on a bolt. Each style wears differently. Loop eyes can develop play in their bushings, and stem studs can loosen or strip if the nut is not torqued correctly. Look at both ends for cracked rubber and bent brackets before removing the old unit.
Shock travel matters for off-road use. A shock with a shorter working stroke can run out of room on rough trails and bottom out, which can damage the mounts. Gas-charged designs help keep damping consistent as the oil heats up, so they hold up better through long sections of trail or highway.
- Check both mount styles before removing the old shock
- Replace cracked or hardened bushings
- Note the stud and eye orientation before disassembly
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 914014 |
| UPC | 614901070132 |
| Shock series | ES9000 |
| Extended length | 13.96 inch |
| Collapsed length | 9.25 inch |
| Travel length | 4.71 inch |
| Upper mount | Stem |
| Lower mount | Loop |
| Position | Front |
| Lift rating | 0 to 1 in. lift |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
It fits 1986 to 1995 Toyota 4Runner and 1986 to 1995 Toyota pickup models as a front-position shock. Confirm fit for your vehicle’s year, model and trim before ordering.
The list covers only these two Toyota models for 1986 to 1995, so the Tacoma and later 4Runners are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stem upper mount and the loop lower mount must match the existing hardware on the truck. Check both mount styles before ordering, since a mismatch means the shock will not bolt in.
What’s included
One ES9000 front shock absorber.
Not included: a dust boot.










