Overview
The Pro Comp ES9000 932009 is a nitrogen gas charged twin tube shock absorber with a 32.83-inch extended length, an 18.82-inch collapsed length and 14.01 inches of travel. It uses factory upper and lower mounts, and it is not adjustable and has no remote reservoir. No vehicle is named for it.
It is built for heavy loads and demanding driving. The 10 stage velocity sensitive valving smooths the highway ride and sharpens off-road handling, and the 1 3/8 inch nylon banded full displacement piston head adds strength.
The shock has double welded shock mounts and a white finish. It is sold as each and does not include a boot, so plan a boot separately if your vehicle uses one.
Key features
- Nitrogen gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
- Factory upper and lower mounts
- Not adjustable, with no remote reservoir
- White finish
Matching lengths and travel
Travel length is the distance the shock can move between fully extended and fully collapsed. It matters because the shock must fit the suspension’s range of motion. A shock with too little travel can bind, while mismatched travel can leave the axle poorly controlled at the end of its range.
Check travel against the shock you are removing, along with the mounting distance. Replace shocks in matching sets on the same axle so damping stays even from side to side. When the old shock has leaked or lost its damping, a new unit with fresh bushings and hardware restores the original control.
- Compare travel and both lengths with the old shock
- Confirm the mounting distance before ordering
- Buy a boot separately if your vehicle uses one
- Inspect mounts for cracks and wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 932009 |
| UPC | 614901998528 |
| Shock series | ES9000 |
| Shock type | Twin tube, nitrogen gas charged |
| Extended length | 32.83 in |
| Collapsed length | 18.82 in |
| Travel length | 14.01 in |
| Upper mount | Factory |
| Lower mount | Factory |
| Piston | 1 3/8 inch nylon banded, full displacement |
| Shock mounts | Double welded |
| Valving | Velocity sensitive, 10 stage |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
No vehicle is named for the ES9000 932009. Compare its 32.83-inch extended and 18.82-inch collapsed lengths with the mounting distance on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both mounts are factory style, so measure the shock you are replacing and compare its mounting distance, extended length and collapsed length with these figures. The boot is not included, so decide on a boot before installation if your vehicle uses one.
What’s included
One shock absorber, sold as each.
Not included: A shock boot.







