Select your vehicle

Pro Comp ES3000 Series Shock Absorber – 326513

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ES3000 Series shock, part 326513, white finish
  • Vehicle-specific extended, collapsed and travel lengths
  • Factory upper and lower mounts
  • Hydraulic, non-adjustable, sold as each

Description

Overview

The Pro Comp Suspension ES3000 326513 is a hydraulic shock absorber from the ES3000 Series. It uses the factory upper and lower mounts, and its extended, collapsed and travel lengths are set to the vehicle. The shock is finished in white and sold as each, with no remote reservoir. Its 10-stage valving is fixed. Confirm the mounting points first.

The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving. Pro Comp says its 5/8 inch chrome-hardened piston rod and Teflon rebound stop are meant for highway comfort and demanding driving, and the double welded mounts add strength. The shock carries the Pro Comp Suspension limited lifetime warranty.

Key features

  • Twin tube cellular gas design
  • 10-stage velocity-sensitive valving
  • 5/8 inch chrome-hardened piston rod
  • Teflon rebound stop
  • Double welded shock mounts
  • Factory upper and lower mounts
  • White finish
  • Pro Comp Suspension limited lifetime warranty

Checking mounts before installing

A shock absorber keeps the tire in contact with the road by damping spring movement. When a replacement uses factory mounts, the mounting points and bushings do much of the work of holding it in place, so inspect them before the new unit goes on. Worn rubber can make a new shock feel loose.

Hydraulic shocks gradually lose damping as seals wear, and a worn unit can make a vehicle bounce after bumps or dip hard in corners. If you replace one side, consider the other side too so the pair matches. Keep the old shock until the new one is confirmed to fit.

  • Clean the mount surfaces before bolting on the new shock
  • Replace cracked or flattened bushings
  • Check the old body for oil as a sign of seal wear

Specifications

Brand Pro Comp Suspension
Part number 326513
UPC 614901042535
Shock series ES3000
Type Hydraulic, twin tube cellular gas design
Extended, collapsed and travel lengths Vehicle specific
Upper mount Factory
Lower mount Factory
Adjustable No
Remote reservoir No
Finish White
Boot included No
Sold as Each

Vehicle fitment

Confirm fit for your vehicle’s year, model and trim before ordering. Compare the factory mount points and vehicle-specific lengths with your current shock before fitting.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One shock absorber, part 326513.

Not included: the dust boot.

SKU: EXP326513 Category:

Specification

Shipping weight 7.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

Does the Pro Comp ES3000 326513 have a fitment list?

No. Confirm fit for your vehicle's year, model and trim before ordering, and compare the factory mounts and vehicle-specific lengths with the shock you are replacing.

Is the 326513 adjustable?

No. It is a non-adjustable hydraulic shock with 10-stage velocity-sensitive valving and a white finish. It has no remote reservoir.

Does the 326513 include a boot?

No. The dust boot is not included with the 326513, and the shock uses factory mounts with vehicle-specific lengths. It is finished in white.

How do I tell if this type of shock is worn?

Look for oil on the outside of the body, a shock that bounces the vehicle several times after a bump, or uneven tire wear. Seal leakage and weak damping are the usual signs, and the shock should be inspected or replaced.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon