Overview
The Tuff Country SX6000 front shock absorber, part number 68153, is a twin-tube, cellular gas charged hydraulic shock for the 1998–2001 Ford Ranger. It is a direct fit in the front position with a 0 in. lift/drop setting.
The design uses multi-stage valving, which Tuff Country says gives a smooth, controlled ride on and off-road. Polyurethane bushings are part of the construction, and the cellular gas charge is intended to limit fade. Tuff Country also recommends the shock for mid-size and mini applications.
Key features
- Twin-tube hydraulic design with cellular gas charge
- Multi-stage valving for a controlled ride
- Polyurethane bushings
- Direct fit in the front position
- Recommended by Tuff Country for mid-size and mini applications
Ford Ranger front shock basics
A front shock on a small pickup works with the front springs and steering linkage to keep the tires in contact with the ground. When the shock is worn, the front end can feel loose, bounce after bumps, or pull to one side under braking. Replacing both front shocks together keeps the feel even, and inspecting the mounts at the same time helps catch worn bushings.
Multi-stage valving is designed to change damping force as the shock moves faster or slower, which helps with both highway stability and rough-road control. Cellular gas charges are often used to limit foaming during repeated hard use. Check the body for oil seepage, look at the bushings for cracks, and make sure the front position is correct before fitting.
- Confirm the front axle position before fitting
- Replace front shocks as a pair
- Inspect the mounting hardware after installation
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 68153 |
| UPC | 70000648944 |
| Shock series | SX8000 Series, as printed by the manufacturer |
| Position | Front |
| Fitment type | Direct fit |
| Lift setting | 0 in. lift/drop |
| Shock type | Hydraulic, cellular gas charged |
| Bushings | Polyurethane |
Vehicle fitment
Fitment is given for the 1998–2001 Ford Ranger in Edge, Splash, XL and XLT trims.
Ford Ranger years outside 1998–2001 and other Ford models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a front position shock, so confirm the front axle position before fitting and do not swap it with a rear unit.
What’s included
One front shock absorber. Check the hardware you need against your installation before starting.









