Select your vehicle

Pro Comp Dual Steering Stabilizer Kit – 222581

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Dual steering stabilizer kit with a shock cylinder and bracket, complete
  • Fits 1999–2004 Ford F-250 and F-350 Super Duty and 2000–2004 Ford Excursion
  • Part number 222581, UPC 614901128505
  • Brackets included

Description

Overview

The Pro Comp Suspension 222581 is a dual steering stabilizer kit for the 2000–2004 Ford Excursion, 1999 Ford F-250 and 1999–2004 Ford F-250 and F-350 Super Duty. Dual kits place two stabilizer units on the steering, which adds damping on trucks that see heavier steering loads than a single unit can manage.

The kit is built around the ES2000 design, which reduces wheel vibration, helps limit suspension component fatigue and cuts bump steer caused by oversized tires or rough roads. It is a complete kit with the shock cylinder and bracket supplied together.

Key features

  • Dual configuration with two stabilizer units
  • Complete kit with shock cylinder and bracket
  • ES2000 series design aimed at reducing wheel vibration and bump steer
  • Direct fit for the Ford trucks shown below

Dual units and load sharing

Two stabilizer units share the steering load, so each one works less hard than a single unit would on the same truck. That arrangement suits heavy steering loads, larger tires and frequent rough-terrain driving. Because the units act together, uneven mounting can make one carry more of the work than the other, which shortens its life.

Both units should be checked for equal resistance and clean seals. If one feels weaker, inspect its mount and bracket before assuming the shock itself has failed. Tie rod ends, drag link and pitman arm should show little play, since loose joints throw the stabilizers off balance and make the steering harder to keep straight.

  • Compare resistance on both units during each service
  • Re-check mount alignment after changing tires
  • Keep the bracket fasteners snug on a regular schedule

Specifications

Brand Pro Comp Suspension
Part number 222581
UPC 614901128505
Type Dual steering stabilizer
Series ES2000
Brackets Included
Shock boot Not included
Fitment type Direct fit

Vehicle fitment

This kit fits the 2000–2004 Ford Excursion (Eddie Bauer, Limited, XLS and XLT), the 1999 Ford F-250 (Base, Lariat, XL and XLT), the 1999–2004 Ford F-250 Super Duty and the 1999–2004 Ford F-350 Super Duty.

The 1999 F-250 entry does not extend to later F-250 years, and the Excursion years after 2004 are not shown. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Dual stabilizers share the steering load, so both units need to be mounted with equal extension and clean attachment points. Check the travel of both units through a full turn before driving.

What’s included

A complete dual kit: shock cylinder and bracket.

Not included: shock boot.

SKU: EXP222581 Category:

Specification

Shipping weight 15.00 lbs
Package dimensions 15.00 × 5.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Ford Excursion2000–2004Eddie Bauer, Limited, XLS, XLT
Ford F-2501999Base, Lariat, XL, XLT
Ford F-250 Super Duty1999–2004Harley-Davidson Edition, King Ranch, Lariat, XL, XLT
Ford F-350 Super Duty1999–2004Harley-Davidson Edition, King Ranch, Lariat, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the Pro Comp 222581 a dual steering stabilizer?

Yes. It is a dual kit with a shock cylinder and bracket, made for trucks that run two stabilizer units. The kit is complete as supplied.

Does this kit fit a 1999 Ford F-250?

Yes. It fits the 1999 Ford F-250 in the Base, Lariat, XL and XLT trims, along with the 1999–2004 F-250 and F-350 Super Duty range. Confirm your year and trim before ordering.

Are the brackets supplied with the 222581?

Yes. The kit includes a bracket along with the shock cylinder, so it arrives complete. The shock boot is not included, so plan for one separately if your installation calls for it.

Do dual stabilizers need more maintenance than a single unit?

Yes, in one sense: there are two units to inspect, so checks take a little longer. Both should show similar resistance and leak-free seals. If one unit is weaker than the other, check its mount and replace it so the load stays balanced.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon