Select your vehicle

Pro Comp Single Steering Stabilizer Kit – 219526

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Single steering stabilizer kit with ES2000 shock and all brackets
  • For vehicles not equipped with stock stabilizer mounts
  • Part number 219526, UPC 614901030556
  • Single configuration

Description

Overview

The Pro Comp Suspension 219526 is a single steering stabilizer kit for vehicles that are not equipped with stock stabilizer mounts. It includes one ES2000 stabilizer shock and all the necessary brackets, so the kit supplies the mounting that a stock setup would otherwise provide.

The ES2000 shock is meant to sharpen steering response, damp wheel vibration and limit bump steer when oversized tires or rough ground push the steering around.

Key features

  • One ES2000 stabilizer shock
  • All necessary brackets included
  • Intended for vehicles without stock stabilizer mounts
  • Single configuration

Choosing a stabilizer setup

A steering stabilizer works alongside the tie rod and drag link to control steering movement over uneven ground. When a truck has no factory stabilizer mounts, the mounting point has to be built at the frame or axle, which is where a complete bracket package becomes useful. Before installing, look at how the steering components sit and confirm the stabilizer can reach both ends without binding through full travel.

Tire size and suspension height both change how much steering motion a stabilizer has to control. Larger tires and added lift can alter steering geometry, so the stabilizer should be checked after any change to ride height or tire diameter. A correctly installed unit should move freely through the full steering range without contacting nearby parts.

  • Check clearance at full lock before driving
  • Re-check bracket bolts after the first few trail runs

Specifications

Brand Pro Comp Suspension
Part number 219526
UPC 614901030556
Type Single
Series ES2000
Mounting Brackets for vehicles without stock stabilizer mounts
Brackets Included
Shock boot Not included
Fitment type Direct fit

Vehicle fitment

Fitment is not confirmed for this kit. It is intended for trucks without factory stabilizer mounts, so verify that your truck has no factory mounts. Confirm the year, model and trim before ordering.

Confirm the year, model and trim before ordering, since the kit names no vehicle.

What’s included

One ES2000 stabilizer shock and all the necessary brackets.

Not included: shock boot.

SKU: EXP219526 Category:

Specification

Shipping weight 7.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

Is the 219526 for trucks without stock stabilizer mounts?

Yes. The kit is intended for vehicles without stock stabilizer mounts, and it includes all the brackets needed for installation.

Does the 219526 include brackets?

Yes. All the necessary brackets are included with the single ES2000 stabilizer shock, so the kit does not depend on factory mounts.

Is the 219526 a single or dual kit?

It is a single kit with one ES2000 stabilizer shock and all the brackets. It does not include a dual configuration.

How can I tell if a steering stabilizer needs replacing?

Look for a shock body that is leaking fluid, a cracked or loose bracket, or worn bushings and bolts. Wandering, a steering wheel that returns to center slowly, or new vibration at speed can also point to a worn unit that should be inspected.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon