Overview
The Pro Comp Suspension 222510 is a single ES2000 steering stabilizer kit. The brackets are not included, so mounting hardware must be sourced to suit the steering linkage on your truck.
The ES2000 design is meant to improve handling, reduce wheel vibration and limit bump steer caused by oversized tires or rough roads. Stabilizer length and mounting points must suit the steering layout, so fit still depends on the specific truck.
Key features
- Single ES2000 steering stabilizer
- Labelled universal fit
- Brackets not included
- ES2000 series design
Choosing mounting hardware
A steering stabilizer damps quick movements of the front wheels, such as those caused by a tire striking a rock or a steering input on a rough trail. It works alongside the tie rods and drag link, so its effect depends on how the steering is set up. Stabilizers are often replaced together with worn tie rod ends or drag link ends, because a loose joint lets the stabilizer load the wrong point.
When choosing mounting hardware, start with the bracket points on the axle and frame, then check the stabilizer’s extended and compressed lengths against them with the wheels turned to full lock. Leave enough clearance for full suspension travel and for the tie rod to move. Oversized tires change steering geometry, so re-check clearance after any tire change.
- Check for play in tie rod ends and ball joints before fitting
- Inspect bushings and bolts after the first few trail runs
- Look for fresh oil or leaks at the cylinder seals
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 222510 |
| UPC | 614901031270 |
| Type | Single |
| Series | ES2000 |
| Fitment label | Universal fit |
| Brackets | Not included |
| Shock boot | Not included |
Vehicle fitment
This kit fits a steering setup that matches its length and mounting points. Confirm fit for your vehicle’s year, model and trim before ordering, and measure the mounting points before choosing this kit.
Confirm the year, model and trim before ordering, and measure the mounting points before choosing this kit.
Installation notes
Because the brackets are not included, the mounting hardware has to be sourced for the steering linkage on your truck. Check the stabilizer length against the points it will bolt to.
What’s included
One ES2000 steering stabilizer.
Not included: brackets and shock boot.























