Overview
The Pro Comp Suspension 222585 is a single steering stabilizer kit for the 2000–2005 Ford Excursion and the 1999–2006 Ford F-250 and F-350 Super Duty. It contains one ES2000 stabilizer shock and the brackets that hold it to the steering, and it is a direct-fit part for the trucks below.
The ES2000 design is intended to cut down on wheel vibration and bump steer, which is the steering wander that shows up when the tires strike bumps or the truck runs oversized tires on rough ground. The shock is a single-unit solution, so it suits trucks that do not need the extra damping of a dual setup.
Key features
- One ES2000 steering stabilizer shock
- Brackets included with the kit
- Single configuration for the listed Excursion and Super Duty trucks
- Aimed at reducing bump steer and wheel vibration
Single stabilizer on heavy-duty trucks
A single stabilizer suits trucks that need damping on the steering but do not require the extra load sharing of a second unit. On heavy-duty Excursion and Super Duty trucks, one well-mounted shock can reduce the wander that builds up over rough ground. Good mounting is the main factor, since an angled or loose unit loses effectiveness quickly.
Before fitting, check the front linkage for worn tie rod ends, drag link ends and pitman arm bushings. Loose joints allow the wheels to move more than the damper can control, which can make a sound stabilizer seem weak. Clean the mounting points, confirm the brackets are tight and inspect the shock body for leaks after the first drive.
- Confirm the shock moves through full range without binding
- Check the brackets for cracks or elongated holes
- Replace worn steering joints alongside the stabilizer
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 222585 |
| UPC | 614901697735 |
| Type | Single steering stabilizer |
| Series | ES2000 |
| Brackets | Included |
| Shock boot | Not included |
| Fitment type | Direct fit |
Vehicle fitment
This kit fits the 2000–2005 Ford Excursion (Eddie Bauer, Limited, XLS and XLT), the 1999–2006 Ford F-250 Super Duty (King Ranch, Lariat, XL and XLT) and the 1999–2006 Ford F-350 Super Duty (King Ranch, Lariat, XL and XLT).
Years outside these ranges, and the Harley-Davidson Edition trucks that appear on the 222570 kit, are not part of this one. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the supplied brackets to mount the shock on clean steering-linkage points, then cycle the steering through its full range to confirm the shock does not bind.
What’s included
One ES2000 stabilizer shock and all brackets.
Not included: shock boot.







