Overview
The Pro Comp Suspension 222570 is a single steering stabilizer kit for the 2000–2004 Ford Excursion and the 1999–2004 Ford F-250 and F-350 Super Duty. It consists of one ES2000 steering stabilizer shock and the brackets needed to fit it, so the front steering linkage gets a single point of damping.
The ES2000 is a shock designed to lessen wheel vibration and bump steer, the steering kick caused by bumps when the tires are heavy or the terrain is rough. The kit is a direct fit for the Ford models below.
Key features
- One ES2000 stabilizer shock
- All necessary brackets included
- Targets wheel vibration and bump steer
- Direct fit for the Ford Excursion and Super Duty trucks shown below
Steering damping and bump steer
Bump steer is the tendency of the front wheels to steer when the suspension moves up and down, and it grows when tires are heavier or the terrain is rough. A stabilizer shock resists the quick side-to-side motion that drives this, which helps the driver keep a straight line. On heavy-duty trucks the linkage carries more load, so a working damper matters more.
Before replacing a stabilizer, check the tie rod ends, drag link and pitman arm for play, since loose joints can feel like a failing shock. Look at the mounting brackets for cracks or bent sections and confirm the shock moves freely through its full travel. Tire size and wheel alignment also affect how much damping the linkage needs.
- Look for leaks around the shock body
- Check bushings and bracket fasteners after rough use
- Replace worn joints in the same service visit
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 222570 |
| UPC | 614901112337 |
| Type | Single steering stabilizer |
| Series | ES2000 |
| Brackets | Included |
| Shock boot | Not included |
| Fitment type | Direct fit |
Vehicle fitment
This kit fits the 2000–2004 Ford Excursion (Eddie Bauer, Limited, XLS and XLT), the 1999–2004 Ford F-250 Super Duty and the 1999–2004 Ford F-350 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL and XLT).
Model years outside these ranges, including the 2005 and later Excursion and Super Duty trucks, are not covered by this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
All brackets are included, so the kit mounts to the steering linkage without separate fabrication. Check that the mounting points are clean and that the shock can move through its full travel before the wheels are turned.
What’s included
One ES2000 steering stabilizer shock and the mounting brackets.
Not included: shock boot.







