Overview
The Pro Comp Suspension 226010 is a single steering stabilizer kit for the 2011–2017 Chevrolet Silverado 2500 HD and the 2011–2017 GMC Sierra 2500 HD. It is a complete single-unit kit with a shock cylinder and bracket, from Pro Comp’s ES2000 series.
The ES2000 design is described by Pro Comp as a way to improve steering handling, reduce wheel vibration and lessen bump steer caused by oversized tires or uneven roads. Heavy-duty trucks on larger tires are the usual reason to add a single stabilizer.
Key features
- Single stabilizer configuration
- Complete kit with shock cylinder and bracket
- ES2000 series design
- Direct fit for the 2500 HD trucks shown below
Heavy-duty steering basics
Heavy-duty pickups carry more front axle weight and often run bigger tires than their lighter counterparts. That added load makes the steering linkage work harder over washboard and broken pavement, and a single stabilizer helps control the resulting side movement. Mounting the shock on a clean, straight bracket and checking the hardware after the first drives are the steps most likely to pay off.
Heavy trucks also put more stress on tie rod ends, drag links and idler arms. Before installing the kit, look for play at each joint and replace anything that feels loose. Periodic inspection of the shock body and mounting bolts keeps the setup working as designed through years of towing and daily use.
- Check drag link and idler arm play
- Inspect tie rod ends at service
- Confirm bracket alignment before tightening
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 226010 |
| UPC | 614901021899 |
| Type | Single steering stabilizer |
| Series | ES2000 |
| Brackets | Included |
| Shock boot | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2011–2017 Chevrolet Silverado 2500 HD (High Country, LT, LTZ and WT) and the 2011–2017 GMC Sierra 2500 HD (Base, Denali, SLE, SLT and WT).
The 1500 series trucks and the 2018 and later 2500 HD models are not part of this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the bracket lines up with the steering linkage on your truck before tightening the mounting hardware.
What’s included
One single steering stabilizer shock cylinder with its bracket.
Not included: shock boot.






