Overview
The Pro Comp K4177T is a 6-inch stage 1 suspension lift with PRO-X front and rear shocks for the 2011–2016 Ford F-250 Super Duty. The lift height range is 6 to 7 inches, and the shocks are included.
The rear uses a block and spacer setup with block and U-bolt components and add-a-leaf hardware. The kit fits the King Ranch, Lariat, Platinum, XL and XLT versions. Laser cut brackets and a drop pitman arm are used for suspension and steering geometry, and the coil springs raise ride height while improving ride quality.
Key features
- Laser cut brackets for suspension geometry
- Drop pitman arm for steering geometry
- Specific rate coil springs that raise ride height
- PRO-X front and rear shocks, included
- Block and U-bolt rear lift with add-a-leaf hardware
Rear lift considerations
A block and U-bolt rear lift with add-a-leaf hardware changes the way the rear spring pack carries load. The added leaf can raise the rear axle and stiffen the ride under light loads, so the leaf pack should be inspected for cracks and proper seating after installation. Check that the U-bolts are tightened evenly and retorqued after the first drives. A rear lift also changes the pinion angle, which can cause vibration if it is left unchecked.
Shock lengths should be matched to the new ride height so the suspension travels through its intended range. Coil springs and a drop pitman arm also shift front geometry, so front alignment is worth a check when the rear lift is set. Keep an eye on the rear bump stops as well, since the new height can change how often they engage.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4177T |
| Suspension type | Lift kit, stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | PRO-X |
| Rear shocks | PRO-X, included |
| Rear lift method | Block/spacer with block and U-bolt and add-a-leaf |
| Brackets and steering | Laser cut brackets and drop pitman arm |
| Shocks included | Yes |
Vehicle fitment
It fits the 2011–2016 Ford F-250 Super Duty in the King Ranch, Lariat, Platinum, XL and XLT versions.
It covers 2011 through 2016 models only, so 2017 and newer F-250 trucks are not covered. It does not fit the F-350 Super Duty or 2010 and older F-250 trucks. Confirm year, model and trim before buying.
Installation notes
The rear lift and the coil springs both change ride height, so check the driveline angles and the alignment after the kit is installed.
What’s included
PRO-X front and rear shocks, the block and U-bolt rear lift components with add-a-leaf hardware, the laser cut brackets, and the drop pitman arm.



















