Overview
The Pro Comp 6 Inch Stage II Lift Kit with Pro Runner Shocks, part number K2068BP, is a coil spring and short arm suspension lift that gives 6 inches of lift. It is a direct fit kit. Confirm fit for your vehicle’s year, model and trim before ordering.
The kit includes front coil springs with upper and lower control arms, front sway bar links, bump stop extensions, a pitman arm for steering correction, brake line extension brackets and a block and U-bolt kit for the rear. Pro Runner shocks are fitted at the front and rear.
Key features
- 6 inch lift in the stage 1 category, within a 5 to 6.99 inch lift height range
- Front lift with coil springs and upper and lower control arms
- Front sway bar links
- Bump stop extensions
- Steering correction with a pitman arm
- Brake line extension brackets
- Rear lift with a block and U-bolt kit
- Pro Runner shocks included front and rear
Steering and shock setup
A pitman arm and control arm package changes how steering loads reach the front wheels, so the steering box, drag link and tie rod ends deserve a close look during installation. Worn ends that were acceptable before a lift tend to show up as play after it, and replacing them while the suspension is apart is a practical way to avoid repeat work.
Shocks at both ends should be matched to the new ride height, and their mounting points should be checked for wear. Look for leaks and loose fasteners on the Pro Runner units, and replace any bushing or bolt that looks worn before going off-road. Driveline angles and brake hose length should be checked on any Stage II build.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2068BP |
| Alternate part number | EXPK2068BP |
| UPC | 70000637819 |
| Product type | Suspension lift kit with shocks |
| Lift height | 6 inches; range 5 to 6.99 inches |
| Suspension type | Coil spring and short arm |
| Front lift | Coil springs, upper and lower control arms |
| Rear lift method | Lift blocks and U-bolts |
| Steering correction | Pitman arm |
| Front shocks | Pro Runner |
| Rear shocks | Pro Runner |
| Fitment type | Direct fit |
Vehicle fitment
This kit is sold as a direct fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Match your vehicle’s year, model and trim against the kit’s fit details before buying.
Installation notes
This Stage II kit changes the front springs and control arms and adds a pitman arm, bump stop extensions and brake line extension brackets, so professional installation is recommended. Follow Pro Comp’s torque figures, then check the hardware again after the first miles. Get an alignment, and confirm driveline and tire clearance before off-road use. Check local rules on vehicle height and lighting for public roads.
What’s included
- Front coil springs
- Upper and lower control arms
- Front sway bar links
- Bump stop extensions
- Pitman arm for steering correction
- Brake line extension brackets
- Rear block and U-bolt kit
- Front and rear Pro Runner shocks









