Overview
The Pro Comp K2101BP is a 6-inch lift kit for 2014–2017 Ram 1500 trucks with 4WD and Eco diesel engines. It suits Big Horn, Laramie, Limited, Lone Star, Outdoorsman, SLT and Tradesman trims.
The kit is the Pro Runner shock version of the K2101B. It uses the same crossmembers, steering knuckles and drop brackets, and it adds Pro Runner shock absorbers at the rear. The front shocks are the original units, which are reused.
The K2101BP keeps the K2101B package and swaps the rear shocks for Pro Runner shock absorbers. The front alignment and driveline checks that apply to the K2101B apply to this kit as well.
Key features
- 6-inch lift kit with a listed lift height range of 5 to 6.99 inches
- Rear Pro Runner shock absorbers
- Crossmembers and steering knuckles
- Front strut extensions and compression strut with mount
- Skid plate and wiring harness
Pro Runner shock choice
Shock choice is one of the few differences between the K2101BP and the K2101B, so it is worth understanding what changes. Rear damping affects how the truck settles over bumps and how it handles weight in the bed. Because the crossmembers and knuckles stay the same, the front setup and the driveline plan carry over unchanged from the other kit.
Rear shock selection also matters for towing and payload. A heavier load compresses the rear springs further, and the shock must control that movement without bottoming out. Inspect rear shock mounts and eyelets at each service, and replace a worn unit before it affects tire wear or steering feel on the highway.
- Confirm rear shock mount clearance
- Check rear spacers for wear
- Test the ride after the first tow
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2101BP |
| UPC | 70000702756 |
| Lift | 6 inches, stage 1 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Knuckle |
| Front shocks | Reuse OEM |
| Rear shocks | Pro Runner |
| Rear lift method | Spacers |
| Max tire size | 35×12.50R17-20, 315/70R17, 305/70R18, 325/65R18, 295/60R20 |
| Wheel size | 18×9 with 5″ backspacing, or 20×9 with 5″ backspacing |
Vehicle fitment
It is designed for 2014–2017 Ram 1500 trucks with the same trim range as the K2101B. Ram 2500 trucks and 2018 models fall outside its coverage.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the knuckles and crossmembers are replaced, the front alignment must be set after installation. The rear coil spring spacers change the rear geometry, so check the driveline angles as well.
What’s included
The box includes crossmembers, differential drop brackets, front strut extensions, a driveshaft spacer, front sway bar end link extensions, a wiring harness, front brake lines, steering knuckles, a compression strut and mount, a skid plate, rear control arm drop brackets, rear sway bar end links, rear coil spring spacers, a rear brake line drop bracket, a rear track bar bracket, rear Pro Runner shock absorbers and hardware.









