Overview
The K4189BPX is a 6-inch lift kit with front MX2.75 coilovers and Pro Runner rear shocks for the 2015–2018 Ford F-150. It is a stage 2 coilover upgrade, with crossmembers and steering knuckles at the front and a block and U-bolt rear lift.
The front package includes impact struts, sway bar spacers and brake line extension brackets. The front shock is the MX2.75 coilover named in the product name.
Key features
- 6-inch lift height, stage 2
- Front MX2.75 coilovers
- Crossmembers and steering knuckles
- Impact struts
- Sway bar spacers and brake line extension brackets
- Block and U-bolt rear lift with Pro Runner rear shocks
Coilover setup considerations
Coilovers combine the spring and damper into one unit, so the front ride height and damping are tied together. That makes the front setup more sensitive to spring preload and to the shock mounts than a standard strut, and it is worth checking that the coilovers sit square after installation. Because the front and rear are set up differently, the feel of the truck on pavement and on washboard roads will depend on how the two ends are balanced.
Impact struts and sway bar spacers are usually handled together with coilovers, since each one changes how the front end moves under load. Look at brake line length and routing once the front is raised, and inspect the lines for stretch or rubbing at every service. Coilover shocks benefit from periodic checks of the mounting hardware and the dust boots, which keep grit away from the shaft.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4189BPX |
| UPC | 700007519381 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 2 |
| Suspension type | Coilover upgrade |
| Front shocks | MX2.75 coilover |
| Rear lift | Lift blocks and U-bolts |
| Rear shocks | Pro Runner |
Vehicle fitment
It fits the 2015–2018 Ford F-150 in the King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL and XLT versions.
Only the 2015 through 2018 model years are on the list, so the 2014 truck and the 2019 and later generation are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Coilovers on the front change the spring and damper setup, so the alignment should be set after the coilovers are installed and the brake lines checked for clearance.
What’s included
The kit includes the front MX2.75 coilovers, crossmembers, steering knuckles, impact struts, sway bar spacers, brake line extension brackets, the block and U-bolt rear lift, and Pro Runner rear shocks.









