Overview
The Pro Comp Suspension 22256 is a 3.5 inch rear lift block with U-bolt kit. The box contains two tapered cast iron risers, four U-bolts, eight heavy duty flat washers and eight hi-nuts.
Key features
- 3.5 inch rear lift
- Tapered cast iron risers
- U-bolts and hi-nuts in the box
Before you install a larger lift
A larger rear lift raises the axle further than a smaller block, so the shock mounts, brake lines and driveshaft angles all change more. Many owners pair a block this size with longer shocks or a driveshaft check, so the suspension geometry stays within a workable range. Spring condition matters as well, because an older pack can sag or shift once the lift is added.
Set aside time to measure the spring pack and axle before ordering, then recheck the U-bolt length and clamp fit once the block is installed. Track the tightness of the hardware during the first trips, because settling is common after any lift. Brake line length should be checked, and the parking brake cable may need adjustment after the axle moves.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 22256 |
| UPC | 614901110258 |
| Lift height | 3.5 in |
| Riser material | Cast iron |
| Risers | 2 |
| U-bolts | 4 |
| Flat washers | 8 heavy duty |
| Hi-nuts | 8 |
Vehicle fitment
It is a direct fit kit. Measure your spring pack before ordering, and confirm fit for your vehicle’s year, model and trim.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Recheck the U-bolt length and clamp fit after the 3.5 inch riser is installed.
What’s included
Two cast iron risers, four U-bolts, eight heavy duty flat washers and eight hi-nuts.








