Overview
The Pro Comp 57492 is a set of two rear coil springs for the 2007–2010 Toyota FJ Cruiser in the Base, TRD Special Edition and Trail Teams Special Edition trims. The set gives a 3-inch rear lift.
Each spring is a preset coil with a specific spring rate that provides lift along with improved ride characteristics. The springs go on the rear, one for each side.
A rear lift changes the rear geometry and the driveline angle, so measure the driveline and check the alignment after the springs are installed.
Key features
- 3-inch rear lift for the FJ Cruiser
- Set of 2 for the rear
- Preset coil with a specific spring rate
- Fits Base, TRD Special Edition and Trail Teams Special Edition trims
Rear spring fit and use
Rear springs carry the weight of the rear axle and the load in the cargo area, so their behavior changes once gear, a roof rack or a spare tire is added. A rear spring with more lift can help level the truck, but it also changes the driveline angle, which can cause vibration if the change is large. Check the driveline after the springs are installed.
Because the rear springs set the rear ride height, the brake lines, brake hoses and fuel lines should be checked for stretch as the axle moves. Keep the shocks in good condition, since a worn shock can be overloaded by a raised rear end.
- Measure the rear driveline angle after the install
- Check brake lines and fuel lines for stretch
- Inspect rear shocks for leaks
- Watch for rear sag under a heavy cargo load
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 57492 |
| UPC | 614901127041 |
| Position | Rear |
| Lift | 3 inches |
| Quantity | Set of 2 |
| Fitment type | Direct fit |
Vehicle fitment
Pro Comp lists these rear coil springs as a direct fit for the 2007–2010 Toyota FJ Cruiser, including the Base, TRD Special Edition and Trail Teams Special Edition trims.
The list does not include the Tacoma or any other Toyota model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the rear driveline angle after installation, and check the alignment.
What’s included
A set of 2 rear coil springs with a 3-inch lift.







