Overview
The Pro Comp 2×2 Square S4 GEN3 LED Spot Lights, part number 76414P, are sold as a set of two 3 x 3 inch spot lights. Each light is rated at 12 watts and 1680 lumens, with a clear lens and a black housing.
The housing is IP67 with a shockproof 3800 polyester powder coat case. The LEDs have a life span of 50,000-plus hours, and the lights are universal mounting and universal fit.
Spot lights focus their output into a narrower beam than flood lights, so the 76414P suits lighting that has to reach further ahead. At 12 watts and 1680 lumens per light, it is rated below the 76413P flood light in the same range, so the two models give different output levels.
The housing is IP67 rated with a shockproof 3800 polyester powder coat case, and the LEDs are rated by Pro Comp for 50,000-plus hours. Mount the lights with the included hardware, and aim the spot at the area you need to see.
Key features
- Set of two lights
- Spot beam pattern
- 12 watts and 1680 lumens per light
- Clear lens and black housing
- IP67 housing
Spot pair aiming
A spot pair concentrates light in a narrow beam, so the aim of each light matters more than the output. Set both lights at the same height and angle so the beams overlap at the distance you need. Because a spot beam reaches far, a small tilt makes a large change down the trail, so adjust in small steps.
Spot lights are often mounted high on a bar or on a roof, where they clear obstacles and light the path ahead. Keep the lens clean, since dust or mud on a clear lens cuts the reach of the beam. After rough trips, check the seals and the bracket bolts before the next run.
- Match the height and angle of both lights
- Adjust aim in small steps
- Keep the lens clean for full reach
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 76414P |
| Type | Light pod |
| Sold as | Set of 2 |
| Size | 3 x 3 inch |
| Bulb type | LED |
| Watts | 12 per light |
| Lumens | 1680 per light |
| Beam pattern | Spot |
| Lens color | Clear |
| Housing color | Black |
| Light shape | Square |
| Mounting location | Universal |
Vehicle fitment
The spot lights are universal fit and are not tied to a particular vehicle. Choose mounting points that give the spot beam a clear view ahead.
Installation notes
Wire the lights through a relay using the included wiring harness and switch, and check local rules on auxiliary lighting before use on public roads.
What’s included
Two lights with a wiring harness, switch, relay, mounting brackets and mounting hardware.




















