Overview
The Pro Comp 75W Wide Angle Cube LED Lights, part number 76411P, are sold as a set of two rectangular LED lights with a black housing and clear lenses. They produce 9000 lumens with a spot/flood beam and are rated 75W.
The lights are built for applications that need a wide spread beam, with up to 140 degrees of horizontal coverage when used in pairs and the same coverage in a single light application. They use universal mounting.
The wide spread beam suits applications that need broad coverage. The lights deliver 9000 lumens and sit in an IP67 housing with a 3800 polyester powder coat case.
The kit includes a wiring harness, switch, relay, and two sets of mounting brackets and hardware. Because the beam is wide, aim the lights so the spread covers the area you want, and check local rules on auxiliary lighting before using them on public roads.
The LEDs are rated for a 50,000-plus hour life span, with a clear lens and black housing.
Key features
- Wide spread beam, up to 140 degrees horizontal coverage
- Rectangular cube shape
- 9000 lumens
- Spot/flood beam pattern
- IP67 housing with a 3800 polyester powder coat case
- 50,000-plus hour life span
Mounting and aiming
Auxiliary LED pods like these work best when placed with the wide beam in mind. Mount them where the housing is secure and the lens is not blocked by bumper bars or the hood edge, and keep them level so the spread falls where you need it. A wide beam lights more of the trail edge and camp area, but it also throws light sideways, so aim with the vehicle parked on level ground.
Wiring matters as much as placement. A relay and fused feed keep the switch from carrying the full load, and a clean ground to the chassis helps prevent flicker. Route harness runs away from moving suspension and exhaust heat, and use grommets where wires pass through sheet metal.
- Check the lenses and seals for cleanliness before each trip
- Re-check bracket bolts after the first few trail runs
- Inspect the harness for chafing after heavy articulation
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 76411P |
| Type | Light pod |
| Sold as | Set of 2 |
| Light shape | Rectangular |
| Bulb type | LED |
| Lumens | 9000 |
| Beam pattern | Spot/flood |
| Horizontal coverage | Up to 140 degrees, in pairs |
| Lens color | Clear |
| Housing color | Black |
| Housing rating | IP67 |
| Mounting location | Universal |
Vehicle fitment
The lights are universal fit and are not tied to a particular vehicle. Pick a mounting position that suits the wide beam.
Installation notes
The kit includes a wiring harness, switch, relay and two sets of mounting brackets and hardware. Check local rules on auxiliary lighting before using the lights on public roads.
What’s included
Two lights with a wiring harness, switch, relay, two sets of mounting brackets and mounting hardware.





















