Select your vehicle
-13%

Pro Comp 2x2 Round Spot LED Lights – 76412P

Pro Comp Suspension

Shop Pro Comp Suspension Light Pods on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp 2×2 round spot LED light, part number 76412P
  • 1920 lumens, 20 watts, spot beam
  • IP67 housing with polyester powder coat case
  • Universal mounting with bracket and hardware

Description

Overview

The Pro Comp 2×2 Round Spot LED Lights, part number 76412P, is a 20 watt spot light rated at 1920 lumens, with a black housing and a spot beam. Its housing is square in shape, so check the shape when it arrives.

The light is a universal fit with universal mounting. The LEDs are rated for a 50,000-plus hour life span.

Spot beams concentrate light into a narrower area than flood beams, so the 76412P suits lighting that has to reach further ahead. Mount it so the spot is aimed where you need the light, and keep the wire route clear of moving parts.

The housing is shockproof, with a 3800 polyester powder coat case.

Key features

  • 20 watts and 1920 lumens
  • Spot beam pattern
  • IP67 housing
  • Shockproof 3800 polyester powder coat case
  • Universal mounting

Spot vs. flood for your use

A spot beam throws light a long way down the road in a narrow pattern. That suits open trails, desert running and night driving at speed, but it gives less light to the sides. Pairing a spot with a flood or combo light covers both distance and the area close to the vehicle.

Spot lights are most useful when they are aimed carefully. Set the aim with the vehicle loaded the way you normally drive, then check it again after the first few rough trips. Keep the housing seal clean, since grit on the gasket can let water in.

  • Pair a spot with a flood light for close-range coverage
  • Aim with the usual load in the vehicle
  • Keep the housing seal clean

Specifications

Brand Pro Comp Suspension
Part number 76412P
Type Light pod
Bulb type LED
Watts 20
Lumens 1920
Beam pattern Spot
Housing color Black
Light shape Square
Housing rating IP67
Mounting location Universal

Vehicle fitment

The light is a universal fit and is not tied to a particular vehicle. Choose a mounting position that suits the spot beam.

Installation notes

The kit includes a wiring harness, switch, relay and two sets of mounting brackets with hardware. Wire it through the relay and check local rules on auxiliary lighting before use on public roads.

What’s included

The light with a wiring harness, switch, relay, two sets of mounting brackets and mounting hardware.

Questions & Answers

Is the 76412P a round or square light?

Yes, the housing is square, even though the name says round. Check the shape when the light arrives, and mount it so the spot is aimed where you need the light.

How bright is the 76412P?

It is rated at 1920 lumens and 20 watts, with a spot beam pattern. Confirm whether the figures apply to a single light, and check the rating against your local rules before mounting it.

Does the 76412P come with mounting brackets?

Yes. Two sets of mounting brackets and hardware are included with the light, along with the wiring harness, switch and relay.

Does a spot light need aiming after installation?

Yes. Aim it after the vehicle is at its normal ride height with the typical load, so the beam lands where you expect. Recheck the aim after a few rough trips, since bracket bolts can loosen.

How do I keep the housing sealed?

Keep the seal clean and free of grit, and check the housing for cracks after trail use. Tighten the mounting hardware without overtightening, which can distort the housing and let water in.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Pro Comp Suspension Light Pods on Amazon