Select your vehicle

Pro Comp 2.5 Inch Rear Leaf Spring – 51323

Pro Comp Suspension

Shop Jeep Wrangler YJ Leaf Springs on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 2.5 inch rear leaf spring for 1987–1995 Jeep Wrangler YJ
  • Driver or passenger side; sold each
  • Bushings not included
  • Part number 51323, UPC 614901140408

Description

Overview

The Pro Comp Suspension 51323 is a 2.5 inch rear leaf spring for the 1987–1995 Jeep Wrangler (YJ). It is sold each for either the driver or passenger side, and it does not include bushings. The spring is designed to add 2.5 inches of rear lift on the YJ.

The diamond-cut multi-leaf construction adds clearance and improves ride quality. Two springs, one for each rear side, make a complete pair.

Key features

  • 2.5 inch lift rear leaf spring
  • Driver or passenger side
  • Diamond-cut multi-leaf construction
  • Single spring, sold each

Choosing rear spring pairs

A rear leaf spring carries the axle and sets the height of the back of the vehicle, so both sides should be replaced together. Swapping one side with an old spring leaves the two sides at different heights and can pull the vehicle toward one side on the road. Plan on two units before you start the job.

Rear springs also work with the shackles, hangers and bushings around them. Inspect the shackle bolts and hanger eyes for cracks, elongation and corrosion while the old spring is out. Worn bushings are often replaced at the same time, since a fresh spring will not seat correctly against worn parts.

Leaf springs flex as the axle moves, so look for broken or shifted leaves after the first few trail runs. Tighten U-bolts and shackle hardware after the first drive, then again after the next outing.

  • Replace rear springs in pairs
  • Inspect shackles and hangers at the same time
  • Recheck U-bolts after the first drives

Specifications

Brand Pro Comp Suspension
Part number 51323
UPC 614901140408
Position Rear
Lift height 2.5 inch
Spring quantity Single spring, sold each
Bushings Not included
Fitment type Direct fit

Vehicle fitment

It fits the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.

The TJ and later Wrangler generations are not covered by this part. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Rear spring changes affect the pinion angle on the YJ, so check the driveline angle after installation and confirm the bushings for your shackle and hanger before assembly.

What’s included

One rear leaf spring.

Not included: bushings.

SKU: EXP51323 Category:

Specification

Shipping weight 28.93 lbs
Package dimensions 46.00 × 8.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (YJ)1987–1995Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the 51323 sold as a pair?

No. It is sold each, for either the driver or passenger side, so a rear pair takes two springs. Bushings are not included with either one.

Does the 51323 fit a 1993 Jeep Wrangler YJ?

Yes. It fits the 1987–1995 Jeep Wrangler (YJ), which includes 1993, in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.

Does this spring come with bushings?

No. Bushings are not included, so check the spring eye and hanger for the bushing size before installing the spring on the rear axle.

How can I tell if rear leaf springs need replacing?

Sagging at one corner, a visible leaf crack, or a rear end that sits uneven are common signs. Check both sides and compare heights on level ground before deciding which spring to replace.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler YJ Leaf Springs on Amazon