Select your vehicle
-13%

Pro Comp 2.5 Inch Leveling Lift Kit – PLF09111

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp 2.5-inch poly lift strut spacer kit, part number PLF09111
  • Two polyurethane strut spacers with hardware kit, black
  • Maximum tire size 35 inches
  • Fits 2004 to 2014 Ford F-150 and 2003 to 2006 Ford Expedition

Description

Overview

The kit is a 2.5-inch poly strut spacer set with two polyurethane strut spacers and a hardware kit, in black. It uses the stock coil springs and lifts the front only. The polyurethane coil spacer is designed for a firm yet supple ride without sacrificing articulation on or off road.

The maximum tire size is 35 inches. Performance series shocks are a practical match for this kit, helping ride quality keep pace with the raised front. It fits the 2003 to 2006 Ford Expedition, the 2004 to 2014 Ford F-150 and the 2006 to 2008 Lincoln Mark LT.

Key features

  • 2.5-inch front lift
  • Two polyurethane strut spacers
  • Uses the stock coil springs
  • Hardware kit included
  • Maximum tire size 35 inches
  • Black finish

Alignment and shock choice

A strut spacer changes the front ride height without touching the coil springs, which is why it suits owners who want a modest lift and a familiar ride. Because the front moves up while the rear stays put, the alignment angles change, and wear on the tires can show up quickly if the setup is not checked.

Shock choice matters once the front is raised. The stock shocks were matched to the original height, so a performance series shock can help the valving keep up with the new geometry. Heavier tires increase load on the front end, so ball joints, tie rods and bushings are worth inspecting before adding the spacers.

  • Get a four-wheel alignment after installation
  • Check shock travel with the front at full droop
  • Inspect ball joints and tie rods before installing

Specifications

Brand Pro Comp Suspension
Part number PLF09111
UPC 614901127409
Type Strut spacer
Lift height 2.5 inches
Front lift method Strut spacers
Spacer material Polyurethane
Quantity Two spacers
Finish Black
Maximum tire size 35 inches

Vehicle fitment

It fits the 2003 to 2006 Ford Expedition in Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT and XLT Sport trims, the 2004 to 2014 Ford F-150 in the trims shown, and the 2006 to 2008 Lincoln Mark LT in Base trim.

The Expedition after 2006 and the F-150 model years outside 2004 to 2014 are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The kit uses the stock coil springs, so the spacers set the ride height. Pro Comp recommends performance series shocks to maximize performance, and an alignment is advisable after the front is raised.

SKU: EXPPLF09111 Category:

Specification

Shipping weight 4.20 lbs
Package dimensions 12.00 × 8.00 × 8.00 in
brands

Fitment

VehicleYearsTrims
Ford Expedition2003–2006Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport
Ford F-1502004–2014FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT
Lincoln Mark LT2006–2008Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the PLF09111 fit a 2005 Ford Expedition?

Yes. It fits the 2003 to 2006 Ford Expedition in the trims shown, which includes 2005 models. Make sure your trim matches before ordering the two polyurethane strut spacers.

Does the PLF09111 use the stock springs?

Yes. The kit uses the stock coil springs with polyurethane strut spacers, so the spring rate stays the same as the factory setup.

What is the maximum tire size for the PLF09111?

The maximum tire size is 35 inches, and the kit is a front-only lift. Because the spacers work with the stock coil springs, the rear ride height stays as it was from the factory.

How often should strut spacers be inspected?

Check the spacers and their hardware at the first alignment and again during regular tire rotations. Look for cracks, flattened areas or loose fasteners. Any change in tire wear or steering feel is a good reason to inspect the front end sooner.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon