Overview
The Pro Comp 65200 is a 2-inch leveling lift kit with two steel strut spacers and a hardware kit. It lifts the front only and fits the 1996 to 2004 Toyota Tacoma in Base, Limited, Pre Runner, S-Runner and SR5 trims. The finish is black.
The maximum tire size is 33 inches, and the kit gives clearance for wheels and tires up to 33 inches in diameter. Factory ride quality and comfort are left unchanged, and a lifetime warranty applies for as long as the owner keeps the vehicle.
Key features
- 2-inch front lift
- Two steel strut spacers
- Hardware kit included
- Maximum tire size 33 inches
- Black finish
Tacoma front lift basics
Early Tacomas carry a front suspension that can sag with age and with a load in the bed, so a front spacer kit brings the nose up to match the rear. The spacers sit on the strut assembly and keep the existing springs in use. Because the rear is unchanged, the front and rear heights will differ only by the amount of the lift.
Tire size and fender clearance deserve attention. Larger tires change the rolling diameter and may rub the inner fender at full lock. Check ball joints, tie rods and steering components on an older truck, since their rubber parts and boots often wear before the lift goes in. Replacing worn shocks at the same time keeps the ride controlled.
- Inspect ball joints and tie rods
- Check inner fender clearance
- Replace worn shocks during install
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 65200 |
| UPC | 614901022629 |
| Type | Leveling lift kit, strut spacer |
| Lift height | 2 inches |
| Front lift method | Strut spacers |
| Spacer material | Steel |
| Finish | Black |
| Maximum tire size | 33 inches |
Vehicle fitment
The kit fits the 1996 to 2004 Toyota Tacoma in Base, Limited, Pre Runner, S-Runner and SR5 trims.
Later Tacoma model years are not on this list. Confirm your vehicle’s year, model and trim before ordering.









