Overview
The Pro Comp Nitro 65210K is a leveling lift kit with 3 inches of front lift and 2 inches of rear lift. The front uses strut spacers, and the rear uses coil spring spacers. The maximum tire size is 33 inches. Hardware and instructions are included.
The kit is an economical alternative to a complete suspension system and keeps the factory steering geometry intact. Factory ride quality and handling are preserved, and a wheel alignment is required after installation. Use a front shock and a rear shock matched to the new ride height.
Strut spacers at the front raise the front without changing the factory steering geometry. Coil spring spacers at the rear raise the rear to match. Shocks should be matched to the new ride height, so check them before you install the kit.
Key features
- 3 inches of front lift
- 2 inches of rear lift
- Front strut spacers
- Rear coil spring spacers
- Maximum tire size 33 inches
- Hardware and instructions included
Setup after a 3-inch lift
A 3-inch front and 2-inch rear lift changes the geometry at both ends, so the setup is more than a bolt-on job. Strut spacers add height without disturbing steering, while coil spring spacers raise the rear. The rear spacers add load to the rear springs and shock mounts, so check their condition.
Driveshaft angles, brake hose length and the position of the sway bar links are worth checking once the new height is set. Tire clearance also matters more with a taller stance, especially on full lock. Inspect ball joints and tie rods because the steering angles change. Keep the alignment printout with your records so later service has a reference point. Recheck fasteners after the first few drives and at each oil change.
- Check driveshaft angles
- Confirm brake hose length
- Keep the alignment record
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 65210K |
| UPC | 614901022520 |
| Type | Nitro leveling lift kit |
| Front lift height | 3 inches |
| Rear lift height | 2 inches |
| Front lift method | Strut spacers |
| Rear lift method | Coil spring spacers |
| Maximum tire size | 33 inches |
| Spacer material | Steel |
| Finish | Black |
Vehicle fitment
Before ordering, compare your vehicle’s year, model and trim with the fit range.
Check Pro Comp’s application list for your vehicle’s year, model and trim before ordering.
Installation notes
Have an alignment performed when the install is finished. Fit shocks matched to the new ride height, because the change in height alters how the shocks work.









