Overview
The Pro Comp Suspension 55305 is a pair of rear coil springs for a 4 inch lift on the 2018–2026 Jeep Wrangler JL. It fits two-door and four-door JL models.
Pro Comp says its coils are designed to provide ride quality without sacrificing durability and load capacity. Pro Comp also says each coil is tested against its specifications.
Key features
- 4 inch lift rear coil spring set
- Height range of 3 to 4.5 inches
- Rear position
- Gray color
Rear lift and alignment
Rear coil springs change the height of the rear of the truck, which also changes the angle of the rear axle and the driveline. A higher rear end can shift pinion angle and cause vibration, so check the driveline after installation. Shocks, bump stops and brake lines may need a look as well, since their length and position depend on ride height.
Coil springs are usually replaced in pairs so both sides carry the same load. Replacing one side alone can cause uneven handling and wear. Before driving, check that the springs seat correctly in their perches and that nothing rubs. Re-torque the hardware after the first few drives and recheck it on a regular schedule.
- Replace springs in pairs
- Check driveline angles after installation
- Look for rubbing at brake lines
- Re-torque fasteners after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 55305 |
| Lift | 4 in |
| Height range | 3 to 4.5 in |
| Position | Rear |
| Color | Gray |
| Quantity | Pair |
Vehicle fitment
It fits the 2018–2026 Jeep Wrangler (JL), in two-door and four-door models.
Earlier Wrangler generations and the Gladiator are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rear lift springs change ride height and suspension geometry, so have the alignment checked afterward.
What’s included
A pair of rear coil springs.








