Overview
The Power Trax 2210-LR is a right lock automatic locker for 27 spline Dana 30 axles. It fits Dana 30 Reverse, Dana 30 TJ and Dana 30 Standard axle types, for front or rear locations.
The locker adds locking traction without a complete differential case replacement, and the ring and pinion setup stays as it is. The unit uses a rugged design intended for Dana 30 axles.
Key features
- Automatic locker design
- Built for 27 spline Dana 30 axles
- Dana 30 Reverse, TJ and Standard types listed
- Ring and pinion setup left unaltered
- Front or rear installation listed
Dana 30 axle types explained
Dana 30 axles come in several types, and the differences matter when you buy a locker. Axle type, spline count and housing layout each affect whether a unit seats correctly and how the carrier lines up. Matching these details before ordering helps prevent a mismatch on installation day.
Automatic lockers are common on trail rigs because they engage on their own when one wheel slips. On the road they feel close to an open differential, though some owners notice a light clunk on tight turns. Front and rear positions may call for different setups, so check each axle separately.
- Count the splines on the axle shaft
- Note whether the axle is front or rear
- Inspect bearings and seals during the rebuild
- Use gear oil suited to locking differentials
Specifications
| Brand | Power Trax |
|---|---|
| Part number | 2210-LR |
| UPC | 698231805695 |
| Locker type | Automatic locker |
| Lock side | Right |
| Axle spline count | 27 splines |
| Axle types | Dana 30 Reverse, Dana 30 TJ, Dana 30 Standard |
| Axle location | Front or rear |
| Popular axle manufacturer | Dana |
| Fitment field | Universal Fit |
Vehicle fitment
Fitment is not tied to a specific vehicle. Confirm the Dana 30 axle type matches your axle, and make sure the fit lines up with your vehicle’s year, model and trim before ordering.
Axles that are not Dana 30 or have a different spline count are outside these figures. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The carrier is reused and ring and pinion geometry is not altered. A qualified differential technician should confirm which Dana 30 type your axle is before installing the locker.
What’s included
The package covers the Power Trax 2210-LR right lock automatic locker.
Not included: Hardware and couplers are not included.


















