Overview
The Power Trax 9203822905 is a no-slip traction differential for Chrysler 8.25 inch rear axles with 29 splines. It combines limited-slip smoothness with locking traction.
Installation needs no ring and pinion setup. Match your Chrysler 8.25 inch rear axle and its 29-spline count before choosing this unit, since fit depends on axle type rather than vehicle model.
Key features
- Limited-slip smoothness combined with locking traction
- Synchronization mechanism said to cut ratcheting noise
- Rear axle location for Chrysler 8.25 inch axles
- 29-spline axle with an open case design
- No ring and pinion setup needed
Chrysler 8.25 axle basics
Matching the housing size and spline count is the first check with any differential, since both decide whether a unit seats correctly in the carrier. Measure the axle before ordering so you do not discover a mismatch after the old case is out of the housing.
A no-slip unit keeps the smooth feel of a limited-slip differential while adding locking grip when one wheel slips. Ratcheting noise is a common complaint with lockers, so a quiet synchronized design is worth weighing against your driving habits. Rear axle work is also a good chance to inspect the bearings, seals and axle shafts before they cause trouble.
Plan for the labor. Pulling a differential case is heavy, and the carrier shims and bearing preload must be set correctly during reassembly. An experienced axle technician can measure these items and keep the gear mesh within range.
- Measure the housing width before ordering
- Check bearing preload during reassembly
- Inspect axle shaft seals
- Use gear oil suited to the locking design
Specifications
| Brand | Power Trax |
|---|---|
| Part number | 9203822905 |
| UPC | 662960011672 |
| Axle type | Chrysler 8.25 inches |
| Axle location | Rear |
| Axle spline | 29 splines |
| Differential type | Automatic locker |
| Case style | Open case |
| Axle manufacturer | Chrysler |
Vehicle fitment
No vehicle is named. Power Trax lists universal fit for the Chrysler 8.25 inch rear axle with 29 splines.
Confirm the 8.25 inch housing and 29-spline count match before choosing this unit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Handling a differential case is heavy labor, so an experienced axle technician is the safer choice if you are new to this work.
What’s included
Look over the parts that arrive against your installation plan first.









