Overview
The Power Trax 1610-LR is a right lock automatic locker for 8-inch axles with 30 splines. It is for a Toyota 8 inch axle type and a 4 cylinder application, and it can be used in front or rear axle locations.
It is a rugged traction upgrade. It reuses the existing carrier, keeps the ring and pinion setup unchanged, and does not require full differential case replacement.
Key features
- Automatic locker design
- Matched to 30 spline axles
- Front or rear axle locations listed
- Keeps the ring and pinion setup unaltered
- Simple installation.
Front or rear use
A right lock automatic locker reduces wheel spin on the right side of the axle when the left side loses traction. Because it reuses the existing carrier, the fit depends mostly on the housing and spline count rather than the gear set. Confirm that the axle type and 30 spline count match before installing, since axles of other sizes need a different unit.
Front and rear lockers do the same job but affect steering and driveline differently. A front locker can change steering feel, so pay attention to how the vehicle tracks on turns. A rear locker tends to affect stability on corners. Test the unit on a safe, low-traction surface before taking the vehicle further off-road, and recheck the bolts after the first few runs.
- Check axle type before installing
- Test steering on a low-speed course
- Recheck bolts after the first outings
Specifications
| Brand | Power Trax |
|---|---|
| Part number | 1610-LR |
| UPC | 698231807705 |
| Locker type | Automatic locker |
| Lock side | Right |
| Axle spline count | 30 splines |
| Axle type | Toyota 8 inch |
| Axle location | Front or rear |
| Popular axle manufacturer | Toyota |
| Fitment field | Universal Fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. The unit is for a Toyota 8 inch axle type with 30 splines and a 4 cylinder application, so measure your axle against those figures first.
Toyota axles of other sizes or spline counts are not covered by these figures. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The carrier is reused, so the ring and pinion stay as they are. Given the work involved, have a qualified differential shop install and test the locker before the vehicle goes off-road.
What’s included
It is the Power Trax 1610-LR right lock automatic locker. Check the package contents before starting, including any hardware or tools you need.






