Select your vehicle

Power Stop Autospecialty OE Vented Rear Brake Rotor – AR83072

Power Stop

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Vented rear OE-style brake rotor for 2007-2011 Dodge Nitro and Jeep Liberty
  • Covers 2007 Liberty (KJ) and 2008-2012 Liberty (KK)
  • Smooth finish, mill balanced
  • Power Stop part number PSTAR83072

Description

Overview

The Power Stop Autospecialty AR83072 is a vented rear brake rotor for the 2007-2011 Dodge Nitro, the 2007 Jeep Liberty (KJ) and the 2008-2012 Jeep Liberty (KK). It is an OE-style replacement for daily driving.

The rotor has a smooth surface that shortens pad break-in and castings with extractor and set screw holes where required. It is mill balanced. Power Stop was founded in 1997 in Southern California and also makes brake pads and drum shoes. This rear rotor covers two Jeep Liberty generations and the Dodge Nitro, so match the year to your vehicle.

This rotor is an OE replacement built for stopping power, low dust and quiet braking. The smooth finish reduces pad break-in time, and the castings carry extractor and set screw holes where required. The AR83072 is the vented rear version for the Nitro and the Liberty models below, and it is not a drilled or slotted design.

Key features

  • Vented rear rotor
  • OE-style replacement
  • Smooth finish for less pad break-in time
  • Mill balanced for durability
  • Extractor and set screw holes where required
  • Low dust and long pad life
  • Suited to non-aggressive driving

Rear brake service tips

Rear rotors do less of the stopping work than fronts, but they still shape how a vehicle pulls under braking. On the Nitro and Liberty, the parking brake often works through the rear hub assembly, so check its adjustment after a rotor swap. Light, even pad contact helps the new surface seat without hot spots.

Rear pads and rotors are often replaced together, since uneven pad wear can leave one side grabbing. Look for scoring, lip wear at the outer edge, or low-speed vibration as signs that the rotors are worn out. Clean the hub face before mounting, and seat the rotor before tightening the caliper bracket.

  • Inspect the rear caliper slide pins
  • Check the parking brake lever travel
  • Replace the rotor when the surface feels glazed

Specifications

Brand Power Stop
Part number PSTAR83072
Part type Brake rotor (Autospecialty OE)
Style Vented
Position Rear
Fit type Direct fit

Vehicle fitment

It fits the 2007-2011 Dodge Nitro, the 2007 Jeep Liberty (KJ) and the 2008-2012 Jeep Liberty (KK).

The KJ fits 2007 only, so 2002-2006 KJ Liberties are not covered. The KK covers 2008-2012. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

Pair the rear rotors with fresh pads so the surfaces wear in together, since the smooth finish shortens that break-in. Use the extractor and set screw holes, where the casting has them, to help the rotor release from the hub. Rear brakes affect stopping, so check pedal feel and the parking brake before driving.

Fitment

VehicleYearsTrims
Dodge Nitro2007–2011Detonator, Heat, R/T, SE, SLT, SXT, Shock
Jeep Liberty (KJ)2007Limited, Sport
Jeep Liberty (KK)2008–2012Jet, Limited, Renegade, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which Jeep Liberty years does the Power Stop AR83072 fit?

It fits the 2007-2011 Dodge Nitro and the 2007 and 2008-2012 Jeep Liberty KJ and KK models, each within the years given.

Is the AR83072 vented, and is it a front or rear rotor?

It is a vented rotor for the rear position of these vehicles. Front rotors for the Nitro and Liberty are separate parts, so confirm you need the rear one.

Will the AR83072 fit a 2005 Jeep Liberty?

No. The KJ Liberty fits 2007 only, so a 2005 model is not covered and needs a rotor made for its own year.

Is the AR83072 a drilled rotor?

No. It is an Autospecialty OE-style rotor with a smooth surface finish for everyday use, not a drilled and slotted performance rotor.

Do rear rotors need replacing with every pad change?

Not always, but it is a good time to inspect them. If the surface is smooth and within its thickness limits, careful cleaning may be enough. Replace the rotors when they are scored, cracked or worn unevenly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon