Overview
The Power Stop S5174 (part number PSTS5174) is a red powder-coated rear brake caliper for Ram 1500, 2500 and 3500 pickups, fitting the 2009–2010 Dodge Ram 2500 and 3500, the 2011–2018 Ram 2500 and 3500, and the 2012 Ram 1500.
Power Stop describes its Performance calipers as direct replacements for the stock units that also look good behind stock or custom wheels. The company remanufactures the caliper and bracket at its Chicago, IL facility and finishes them in a high-temperature red powder coat.
Key features
- Rear caliper that bolts directly in place of the stock caliper
- Remanufactured by Power Stop in Chicago, IL
- Red powder coat for high-temperature use
- New premium boots and seals
- Caliper pins carry high-temperature silicone lubricant
- Abutment clips included where applicable
Pads, rotors and brake fluid
Brake fluid absorbs moisture from the air over time, and that moisture lowers its boiling point. On a heavy-duty truck that tows or runs long grades, aged fluid can make the pedal feel softer under repeated braking. Replacing the fluid on a regular schedule, and using the grade the system calls for, keeps the new caliper working at its best.
When the caliper is replaced, the pads and rotors should be inspected as a set. Rotors worn past their minimum thickness or with heavy scoring will not seat new pads well, and the resulting vibration can be mistaken for a caliper fault. Use pads designed for the truck’s rear axle and bed them in with gradual stops once the system is bled.
- Use the brake fluid grade the system requires
- Check rotor thickness and runout before reinstalling
- Inspect the caliper hose for cracks and seepage
- Bed in new pads with gradual stops
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTS5174 |
| Product type | Rear brake caliper (powder coated, performance) |
| Position | Rear |
| Fit type | Direct fit |
| Finish | High-temperature red powder coat |
| Condition | Remanufactured, with new boots and seals |
| Pin lubricant | High-temperature silicone |
| Abutment clips | Premium clips, included where applicable |
Vehicle fitment
It fits the 2009–2010 Dodge Ram 2500, the 2009–2010 Dodge Ram 3500, the 2011–2018 Ram 2500, the 2011–2018 Ram 3500 and the 2012 Ram 1500, with trims including Laramie, Power Wagon, SLT, ST, SXT, Big Horn, Express and Tradesman where they apply.
Only the 2012 model year of the Ram 1500 is on the list, so other Ram 1500 years are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This caliper takes the stock rear caliper’s place, and the brakes need bleeding afterwards. Use the correct pad and rotor combination with it.
What’s included
A powder-coated rear caliper with new boots and seals, silicone lubricant on the pins, and premium abutment clips where applicable.









