Overview
The Power Stop S5330 (part number PSTS5330) is a red powder-coated rear brake caliper and bracket made for the 2011–2019 Chevrolet Silverado 3500 HD and GMC Sierra 3500 HD.
Power Stop’s Performance calipers target owners who want a direct-fit rear caliper with a finish worth showing off through the wheel spokes. Both the caliper and its bracket are remanufactured in Chicago, IL, then treated with a high-temperature powder coat and assembled with all-new premium boots and seals.
Key features
- Direct-fit rear caliper and bracket for 3500 HD trucks
- Remanufactured in Power Stop’s Chicago, IL facility
- High-temperature red powder coating
- New premium boots and seals
- High-temperature silicone lubricant on the pins
- Abutment clips included where they apply
Rear brakes on heavy-duty trucks
A rear caliper works harder on a heavy-duty truck than on a light pickup. Towing and hauling put sustained heat into the brake system, and the caliper has to keep its piston and slide pins moving freely through every stop. When a caliper begins to stick, one side can pull under braking or the pads can wear unevenly across the axle, so the caliper is worth checking whenever the pads are changed.
Replacing a caliper is also a good time to inspect the rest of the rear brake assembly. Rotors with deep scoring or uneven thickness, worn pad hardware and dry or seized slide pins are commonly replaced alongside the caliper. Pads should suit the rotor and the way the truck is used, since a heavy-duty caliper paired with a mismatched pad can change how the system heats up.
- Check slide pins and bushings for free movement
- Inspect rotors for scoring, cracks and thickness wear
- Look over the flexible hose for swelling or cracking
- Bleed the system and test the pedal before driving
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTS5330 |
| Product type | Rear brake caliper with bracket |
| Position | Rear |
| Fit type | Direct fit, replaces the stock caliper |
| Finish | High-temperature red powder coat |
| Condition | Remanufactured, with new boots and seals |
| Pin lubricant | High-temperature silicone |
| Abutment clips | Premium clips, included where applicable |
Vehicle fitment
It fits the 2011–2019 Chevrolet Silverado 3500 HD (High Country, LT, LTZ and other trims) and the 2011–2019 GMC Sierra 3500 HD (Base, Denali, SLE, SLT and WT).
Silverado and Sierra 2500 HD trucks are not on this list, and neither are the 1500 models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Swapping a caliper opens the hydraulic circuit, so plan on bleeding the brakes after the caliper and bracket are mounted.
What’s included
One powder-coated rear caliper and bracket with new boots and seals, pin lubricant already applied, and abutment clips where applicable.







