Overview
The Power Stop KC2069 is a 1-Click Performance Brake Kit with calipers for the front axle, combining rotors, calipers and pads under one number.
Power Stop’s performance kits are built from drilled and slotted rotors, red powder coated calipers and Z23 Evolution Sport pads. KC2069 follows that formula for the front brakes.
The calipers are remanufactured, lubricated and pressure tested at a Chicago, IL facility. The pads are designed for stronger bite with less noise and dust than many other brands. The kit is a direct fit for the front axle.
A front kit with calipers is a fuller upgrade than a rotor-and-pad set, since the calipers are renewed too. KC2069 is a natural-colored front kit with red calipers. Before ordering, confirm fit for your vehicle’s year, model and trim, and match the part number KC2069 to your application.
Key features
- Front brake kit with calipers
- Cross-drilled and slotted rotors
- Red powder coated calipers
- Z23 Evolution Sport pads
- Vented rotors
- Natural color
Installation sequence
Work on one front corner at a time so the other side remains a reference for how the parts sit. Keep track of which hardware came off and where it goes, and clean the hub face before fitting the new rotor. Rust or debris under the rotor can cause runout that shows up as pedal pulsation.
Once the corner is assembled, pump the pedal until it feels firm before starting the engine, and check the reservoir level. Bed in the pads with a series of moderate stops, letting the brakes cool between runs. Brake fluid absorbs moisture over time, so a flush at the recommended interval keeps the system responding well.
- Torque wheel fasteners in a star pattern
- Check hose routing so it does not rub
- Road test in a low-traffic area
Specifications
| Brand | Power Stop |
|---|---|
| Part number | KC2069 |
| UPC | 70000702847 |
| Part type | Brake kit with calipers |
| Position | Front |
| Rotor type | Vented |
| Caliper type | Aftermarket |
| Color | Natural |
| Pads | Z23 Evolution Sport Carbon Fiber and Ceramic |
| Fit type | Direct fit |
Vehicle fitment
It is a direct-fit kit for the front axle.
Before ordering, make sure the year, make and model match your vehicle, and use the part number KC2069 to check the application.
Installation notes
Replacing the rotors, calipers and pads together gives a matched front brake. Calipers open the brake circuit, so bleed the system and test the pedal.
What’s included
- Cross-drilled and slotted rotors
- Red powder coated calipers
- Z23 Evolution Sport pads







