Overview
The Power Stop Performance Brake Calipers S5396 (part number PSTS5396) are remanufactured rear brake calipers for the 2012–2018 Ford F-150.
Power Stop Performance Brake Calipers are aimed at enthusiasts: they bolt directly in place of the stock calipers and look good behind stock or custom wheels.
The caliper and bracket are remanufactured at Power Stop’s Chicago, IL facility and finished in a high-temperature red powder-coat. New premium boots and seals are fitted, and the caliper pins are lubricated with high-temperature silicone for long life.
Key features
- Bolt-in replacement for the stock rear caliper
- Caliper and bracket remanufactured in Power Stop’s Chicago, IL facility
- High-temperature red powder-coat
- New premium boots and seals
- Silicone-lubricated caliper pins
- Premium abutment clips included where applicable
Before you install a caliper
A rear caliper carries the piston that presses the pad against the rotor, so its seals and boots protect the hydraulic side from water and grit. Remanufactured units replace worn seals and boots, but the pad, rotor and bracket still need inspection. Check the slide pins for free movement and look for fluid leaks at the bleeder and hose fitting.
Rear calipers on half-ton trucks often work with parking brake hardware, so confirm that linkage moves freely before finishing the job. After replacement, bleed the brakes to remove air from the line. Fresh fluid of the type recommended for the vehicle helps keep the system responsive, and the pedal should be firm before the truck is driven.
- Inspect the rotor for heat cracks and thickness
- Check slide pins for smooth movement
- Bleed the brakes after the caliper is installed
- Test the parking brake after the first stops
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTS5396 |
| Product type | Remanufactured brake calipers |
| Position | Rear |
| Finish | High-temperature red powder-coat |
| Fit | Direct fit |
Vehicle fitment
It fits the 2012–2018 Ford F-150 in FX2, FX4, XL, XLT, STX, Lariat, King Ranch, Platinum, Limited, Raptor, Harley-Davidson Edition, Police Responder and SSV versions, so one part number covers the whole range for those years.
Earlier F-150s and the F-250 and F-350 Super Duty are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
After installation, bleed the brakes, because the rear caliper replacement opens the hydraulic circuit.
What’s included
A rear brake caliper with bracket, with abutment clips where applicable.
Not included: Brake pads, rotors and fresh brake fluid.








