Overview
The Power Stop K1887-36 is a front and rear Heavy Duty Truck and Tow brake kit for the 1999 Ford F-250 Super Duty and F-350 Super Duty. It combines slotted and cross-drilled rotors with Z36 high-friction metallic pads for both axles and is supplied without calipers.
Power Stop positions the Z36 kit for wet, hot or hilly roads and for towing at maximum weight. The rotors are coated and brake lines are not included, and Power Stop gives the fitment type as direct fit. A drilled rotor has holes through its friction face and a slotted rotor has grooves cut across it, and the K1887-36 uses both. Power Stop also sells a Z16 kit with a similar number, the K1887, but that one lists no vehicle and uses ceramic pads. The Z36 pads here are metallic and high friction, intended for towing and heavy loads.
Key features
- Front and rear coverage under one part number.
- Slotted and cross-drilled rotors in a coated finish.
- Z36 pads use a high-friction metallic compound.
- Fits the 1999 model year only.
- Calipers and brake lines are not in the kit.
Towing and heavy loads
Heavy-duty truck brakes work hardest when a loaded vehicle is slowing from speed, especially on long downhill grades. Brake fade, the drop in stopping power that comes from overheated pads and rotors, is the main concern for anyone who tows regularly. Rotors with cross-drilled and slotted faces help shed gas and heat from the friction surface, while a high-friction pad compound grips well once it is hot. Metallic pads generally run harder than organic pads and can be louder and more abrasive on rotors, so they suit owners who put real loads on their trucks.
Front and rear kits are usually replaced as a complete set so both axles brake with matched friction. Mixing new rotors with worn pads, or new pads with old rotors, can leave one axle grabbing or pulling. Check the caliper slide pins and brake hoses while the wheels are off, since those parts are not in the box and still carry the braking load.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1887-36 |
| UPC | 792088564931 |
| Product type | Heavy duty truck and tow brake kit without calipers |
| Brake position | Front and rear |
| Rotor type | Slotted and cross drilled, coated |
| Brake pads | Z36 high-friction metallic pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1999 Ford F-250 Super Duty and the 1999 Ford F-350 Super Duty in Lariat, XL and XLT trims.
- 1999 Ford F-250 Super Duty (Lariat, XL, XLT)
- 1999 Ford F-350 Super Duty (Lariat, XL, XLT)
Other Super Duty model years are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A front and rear kit like the K1887-36 means four wheel positions, with rotors and pads replaced together on each axle. The original calipers and brake lines are kept.
What’s included
The K1887-36 contains slotted and cross-drilled rotors and Z36 high-friction metallic pads for the front and rear axles.
Not included: Calipers and brake lines.









