Overview
The Power Stop K2907-36 is a front Z36 Truck and Tow brake kit for the 1999-2002 Ford F-350 Super Duty.
It supplies slotted and cross-drilled rotors and metallic pads, without calipers. The kit is a front-axle set for the 1999-2002 Ford F-350 Super Duty. The Z36 series is designed to improve braking in wet or hilly conditions and while towing at maximum weight.
Key features
- Front kit for the 1999-2002 Ford F-350 Super Duty
- Slotted and cross-drilled coated rotors
- Z36 metallic pads
- Direct fit
- No calipers
Working on the front axle
Front brakes do most of the work when a truck slows down under load, so the front axle is where pad and rotor wear shows up first. Metallic pads are often chosen for heavy-duty front axles because they hold friction when the brakes run hot. Slotted and cross-drilled rotors help move debris and water away from the contact area, which can keep braking more consistent in poor weather.
Older trucks often have worn steering, ball joints and wheel bearings, and these can cause vibration or pulsation that feels like a rotor problem. Before fitting new parts, check the wheel bearings for play and look over the steering linkage. A rotor may be fine while the real cause sits in the suspension.
- Check wheel bearings for play before fitting
- Inspect steering linkage for wear
- Measure rotor thickness at several points
- Replace worn front hoses at the same time
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K2907-36 |
| UPC | 792088945730 |
| Product type | Truck and tow brake kit, without calipers |
| Series | Z36 Truck and Tow |
| Rotor type | Slotted and cross drilled, coated |
| Brake pads | Z36 high-friction metallic |
| Brake position | Front |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Power Stop lists K2907-36 for the 1999-2002 Ford F-350 Super Duty.
The kit covers one Ford model across four model years, which keeps coverage narrow. The F-250 Super Duty and F-350 models from later years are outside it. The kit covers only the front axle, so a rear refresh needs a different part number.
Only the 1999-2002 F-350 Super Duty is covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The existing front calipers are reused because the kit has none. It is direct fit, and brake lines are not part of it.
What’s included
Power Stop supplies slotted and cross-drilled rotors along with Z36 high-friction metallic pads in this kit.
Not included: The kit comes without calipers, and brake lines are not part of it.












