Overview
The Power Stop K4713 is a front Z23 Evolution Sport 1-Click brake kit for the Lexus NX and RX models and the 2008–2018 Toyota Highlander, with drilled and slotted rotors and carbon fiber infused ceramic pads.
The Z23 Evolution Sport name refers to the carbon fiber infused ceramic pad, which is paired with drilled and slotted rotors for drivers who want more bite and a sportier look. The kit is designed to run with low noise and dust, and the drilled holes reduce rotor weight.
Key features
- Evolution rotors with both drilled holes and slots
- Carbon fiber infused ceramic pads from the Z23 Evolution Sport line
- Premium hardware supplied
- Hi-temp lubricant and pin bushing supplied
- Slots add pad bite and air circulation
- Holes and slots clear away debris, dust, gases and water
- Slots de-glaze the pad face for a steadier friction level
- Drilling lowers rotor weight and changes the appearance of the wheels
Caliper and bracket checks
Brake calipers are matched to the bracket and rotor thickness of a given vehicle, so a pad and rotor kit works best when the existing caliper is in good condition. Check the slide pins and piston boots for leaks, corrosion or stiffness before installing new pads. A caliper that does not release fully can cause pad drag, uneven rotor heat and premature wear on the new parts.
Front rotors on crossover SUVs are often replaced in pairs, since uneven rotor wear can cause pulsation through the pedal. Heavier SUVs put more load into the front brakes during downhill driving, so regular inspection matters more than on lighter cars. Keep the brake lines and hoses in view during the job and replace any that show cracking or bulging.
- Inspect caliper slide pins and boots
- Replace worn hardware clips with the new kit
- Check rotor runout before final assembly
- Bed in new pads after the first drive
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K4713 |
| UPC | 700007474561 |
| Brake position | Front |
| Rotor type | Evolution drilled and slotted |
| Brake pads | Z23 Evolution Sport carbon fiber infused ceramic |
| Hardware | Premium hardware, pin bushing and hi-temp lubricant |
| Fit type | Direct fit |
Vehicle fitment
The K4713 fits the 2015–2017 Lexus NX200t, the 2018 Lexus NX300, the 2015–2018 Lexus NX300h, the 2010–2015 Lexus RX350 and RX450h, and the 2008–2018 Toyota Highlander.
Earlier Lexus RX generations and Toyota Highlander models before 2008 are not covered. Front axle only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Hardware, a pin bushing and hi-temp lubricant come with the kit, and it is a direct fit. Replace both wheels on the axle in the same job to keep braking even.
What’s included
Rotors, Z23 pads, premium hardware, pin bushing and hi-temp lubricant.
Not included: Vehicle-specific calipers are not part of the kit, so confirm the caliper you have before ordering.









