Overview
The Rampage Hi-Lift Jack Mount, part number 86612, carries a Hi-Lift jack on the rear of a JK Wrangler by mounting to the factory tailgate hinges. It works with 2-door and 4-door JK models. Installation takes minimal drilling, and the mount does not work with swing away tire carriers.
The mount fits a 35-inch tire without modifications. With spare tire extenders or aftermarket heavy duty tailgate tire carriers, it can fit up to a 37-inch tire with the jack.
Key features
- Mounts to the existing factory rear tailgate hinges
- Minimal drilling required
- Hardware for mounting the brackets to the hinges is included
- Fits a 35-inch tire without modifications
- Up to a 37-inch tire with spare tire extenders or heavy duty tailgate tire carriers
- Optional lock available for the jack mount (part 86613)
Rear carrier setup checks
A rear jack mount adds load to the tailgate hinges, so the condition of the hinges matters as much as the mount. Look for cracks, bent brackets, rust, or loose bolts before installing anything. Hinges that move, squeak or flex under load should be checked by a qualified shop before the mount is used. Weight at the rear also affects handling, so drive carefully when the jack is loaded.
Rear tire carriers and jack mounts often compete for the same space, so decide which setup suits your use before buying parts. Check tire clearance with the door fully open and the tire at its heaviest. Recheck the hardware after the first few trips and after rough trail use. Keep the jack locked firmly in the bracket, since a loose jack can rattle and damage the paint or tailgate.
Specifications
| Brand | Rampage |
|---|---|
| Part number | 86612 |
| UPC | 873563007126 |
| Jack mounting type | Bumper jack mount |
| Tire clearance | 35-inch tire without modifications; up to 37-inch with spare tire extenders or heavy duty tailgate tire carriers |
| Included | Mounting hardware |
| Optional lock | Part 86613 |
Vehicle fitment
This mount fits the 2007–2018 Jeep Wrangler JK, including 70th Anniversary, 75th Anniversary, Rubicon, Sahara and Sport trims and their Unlimited versions.
The mount is for the JK generation; TJ, LJ and JL Wranglers are outside this fitment. It is not compatible with swing away tire carriers. Match your year, model and trim before you order.
Installation notes
The brackets attach to the existing tailgate hinges with minimal drilling, using the hardware included. Because swing away tire carriers are not compatible, check your rear setup first. Make sure the jack is locked firmly in the bracket before the vehicle moves.
What’s included
Jack mount with hardware for mounting the brackets to the hinges.
Not included: the optional lock (part 86613) and the Hi-Lift jack.









