Overview
The JcrOffroad Hi-lift Mount for Adventure Tire Carrier, part number XJAHLM-PC, is a bolt-on mount that lets you carry an off-road jack on the Adventure Carrier. It accommodates 48 inch Hi-lifts and most other jacks, and it works with the JCR Adventure Tire Carrier only.
The mount is black powder coated and made in the U.S.A. It attaches to the carrier, so the carrier must be fitted to a covered vehicle first. Fitment covers the 1984–2001 Jeep Cherokee (XJ).
Key features
- Bolt-on mount for the JCR Adventure Tire Carrier
- Holds 48 inch Hi-lifts and most other jacks
- Black powder coat finish
- Made in the U.S.A.
Carrying a jack safely
A jack carried on a tire carrier sits well behind the rear axle, so it adds weight where the vehicle already works hardest on rough ground. Before each trip, make sure the carrier bolts are tight and the jack sits firmly against the mount. A loose jack can rattle, wear the finish and eventually damage the mount, so secure it with straps or pins as your setup allows.
A Hi-lift is a tool that needs care to work when you need it. Keep the lift and release parts clean and lightly lubricated, and wipe off mud and grit after trail use. Check the handle, pin and base for bends or wear before each outing. Carrying a jack on the outside of the vehicle also exposes it to weather, so a quick inspection after wet or dusty trips is a good habit.
- Recheck mount bolts after rough trail sections
- Keep the jack’s base and handle secured while driving
- Store the jack so it does not rattle against the tailgate
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | XJAHLM-PC |
| UPC | 780456972235 |
| Jacks accommodated | 48 inch Hi-lifts and most other jacks |
| Mounting type | Tire carrier jack mount |
| Works with | JCR Adventure Tire Carrier only |
| Finish | Black powder coat |
| Made in | U.S.A. |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ) in the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims. It works only with the JCR Adventure Tire Carrier, so the carrier must be fitted to a covered vehicle first.
Does not cover other Cherokee generations or Jeep models such as the Grand Cherokee and Wrangler. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mount is bolt-on, and no drilling or welding is listed. Secure the jack firmly on the mount before driving.
What’s included
Check the package contents against your installation before starting.
Not included: the JCR Adventure Tire Carrier, which the mount requires, and the Hi-lift jack itself.














