Overview
The Poison Spyder Customs BFH Disco Skid Plate, part number 17-16-030, is a bare steel skid that protects the factory electric swaybar disconnect motor on JK Wranglers. It is an optional bolt-on skid for the JK BFH front bumper.
It fits 2007 to 2016 Jeep Wrangler (JK) models, including two-door and Unlimited four-door models. As supplied, the disconnect motor hangs low and is exposed to rocks and trail hazards, and the skid protects it.
The skid comes with hardware and instructions to rotate the motor upward, further out of harm’s way. Like the BFH bumper, it is made of CNC laser-cut 3/16-inch plate steel, and it works only with the JK BFH Front Bumper. It is not designed for the stock or other aftermarket bumpers.
Key features
- Protects the factory electric swaybar disconnect motor on JK Wranglers
- Hardware and instructions included to rotate the motor upward
- CNC laser-cut 3/16-inch plate steel
- Bare steel finish
- No cutting or drilling required
- Designed for the JK BFH Front Bumper
Checking the disconnect motor
A swaybar disconnect motor sits low on the front axle, so it can be struck by rocks and ledges that the bumper does not reach. A skid plate covers that exposed area, and rotating the motor upward moves it further from the ground. Before adjusting it, park on level ground and disconnect the battery if the motor needs to be unplugged.
Protecting the motor helps keep the disconnect working, since mud and debris can get into the connector and affect operation. After the skid is fitted, check that the motor and its wiring have room to move freely through the suspension range and that the skid does not rub the tire.
Recheck the hardware after the first few trail runs, and look for scrapes on the skid that show where impacts land. A bent skid can still protect the motor, but it should be straightened or replaced if it no longer clears the components beneath it.
- Park on level ground before adjusting
- Check tire clearance at full travel
- Recheck hardware after early runs
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-16-030 |
| UPC | 614901726954 |
| Type | Disconnect skid |
| Material | 3/16-inch plate steel, CNC laser cut |
| Finish | Bare steel |
| Installation | No cutting or drilling required |
| Required bumper | JK BFH Front Bumper |
| Fitment | It is a direct fit for the 2007 to 2016 Jeep Wrangler (JK). |
Vehicle fitment
It fits the 2007 to 2016 Jeep Wrangler (JK). Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The package includes hardware and instructions for rotating the disconnect motor upward. No cutting or drilling is required.
What’s included
The skid plate, the hardware and the rotation instructions are included.
Not included: the JK BFH Front Bumper, which this skid is designed to work with.












