Overview
The Poison Spyder Hood Louver in black powder coat, part number 17-53-010-PC, is a CNC cut hood vent for 2 and 4-door Jeep models. It is designed to free up airflow through the engine compartment so hot air can leave the bay. Confirm the hood matches the template for your vehicle’s year and body before cutting. It is sold as a single louver with its fasteners and template.
Trail speeds bring a specific cooling problem: little air moves through the engine bay, and the heat it carries stays near the top of the hood. Headers, flex fans and a crowded engine space make it worse. A black louver with openings in the right spots lets that heat out and draws cooler air in through the radiator.
Key features
- Black powder coat finish
- CNC laser-cut and die-stamped
- Thick gauge aluminum
- Light weight and corrosion resistance
- Stiffens thin Jeep hood sheet metal
- Stainless steel fasteners and a full-size template
Engine bay airflow basics
Hood vents work by letting hot air out of the top of the engine bay. Warm air rises and collects under the hood when the vehicle moves slowly, because less air flows across the engine. A vent placed over the hottest area gives that air a route out, and it pulls fresh air through the radiator from the front.
Vent size and placement matter more than the number of holes. A louver cut too far from the engine vents only the air near the hood, while one placed over the heat source helps more. Before cutting, check clearance from the air intake, wiring, hood hinges and the underside of the hood, and leave room for the hood to close cleanly.
- Check hood clearance on the underside first
- Keep wiring and the air intake clear of openings
- Deburr cut edges before fitting the louver
- Recheck hood closing after the first drive
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-53-010-PC |
| UPC | 614901727104 |
| Finish | Black powder coat |
| Material | Aluminum sheet, thick gauge |
| Construction | CNC laser-cut and die-stamped |
| Body style | 2 and 4-door models |
| Fasteners | Stainless steel |
| Template | Full size, with instructions |
| Installation | Requires drilling and cutting the hood |
Vehicle fitment
The louver is made for 2 and 4-door Jeep hoods. Confirm your hood matches the template for your year, model and body before any cutting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install calls for drilling and cutting the hood, and the template marks the openings. Stainless steel fasteners are included for the louver. The job is fairly easy for a careful installer, but a wrong cut cannot be undone, so check each mark against the template first.
Because the finish is black powder coat, the louver is a close match for a black hood. The thick gauge aluminum keeps the louver rigid while the holes are cut, and the template keeps each cut in the same position.
What’s included
One black powder coated hood louver, stainless steel fasteners, a full-size template and instructions.

















