Overview
The Poison Spyder Hood Louver in bare aluminum, part number 17-53-010, is a Jeep hood vent sold for 2 and 4-door models. It frees up airflow through the engine compartment and lets hot air leave the bay, and it is cut from thick aluminum sheet. No model years or chassis codes are named, so confirm the hood on your vehicle matches the louver before any cutting.
Hot air collects at the top of a Jeep’s engine bay, and at crawling speed very little air moves to carry it away. Headers, flex fans and a tight engine space add to the problem. This louver gives that trapped heat a way out and draws cooler outside air in through the radiator, which helps the coolant and the under-hood air.
Key features
- Bare aluminum finish
- CNC laser-cut and die-stamped
- Light weight and corrosion resistant
- Stiffens thin Jeep hood sheet metal
- Designed for 2 and 4-door models
- Stainless steel fasteners and a full-size template
Engine bay airflow tips
A hood louver works best when the engine bay is kept clear. Air can only leave the bay if the path is open, so check that the radiator core, fan shroud and hood insulation are not blocking the opening after cutting. Heat often builds at the top of the bay near the intake, so placement along the hood should follow where hot air gathers rather than just the centerline.
Hood louvers also change how the hood stiffens and how it sounds at speed. Dust and water can enter the bay through any opening, so a simple mesh or foam seal can be considered on the underside. Before cutting, confirm clearance above the engine, the hood latch and any wiring that runs near the hood underside.
- Clear debris from the bay before and after installation
- Check hood latch clearance after fitting
- Inspect fasteners after the first few drives
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-53-010 |
| UPC | 614901727098 |
| Finish | Bare aluminum |
| Material | Aluminum sheet, thick gauge |
| Construction | CNC laser-cut and die-stamped |
| Body style | 2 and 4-door models |
| Fasteners | Stainless steel |
| Template | Full size, with instructions |
| Installation | Requires drilling and cutting the hood |
Vehicle fitment
It is made for 2 and 4-door Jeep hoods. Confirm fit for your vehicle’s year, model and trim before ordering, and compare the template with your hood before cutting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The installation is drilling and cutting the hood, guided by the template. Stainless steel fasteners finish the job. Mark every opening carefully before the first cut, since a cut cannot be undone.
The bare aluminum version of this louver is a separate part number from the black powder coated version, so pick the finish first. The aluminum is light and corrosion resistant, which suits a part that sits in the engine bay and is exposed to weather.
What’s included
One bare aluminum hood louver, stainless steel fasteners, a full-size template and instructions.
















