Overview
The Poison Spyder 13-04-040-ALUM is a set of comp cut crusher corners in bare aluminum for the 1987–1995 Jeep Wrangler (YJ), in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims. The comp cut wheel opening is built for competition-style wheeling and the largest tires.
The rear of the wheel well is open, which gives room for wheelbase stretches and maximum clearance for the hardest wheeling. The corners include provisions for flush-mounted LED taillights. The aluminum version is a significant weight saving compared with standard crusher corners.
The corners are laser cut from high strength 3/16-inch plate aluminum and roll-formed to fit the Jeep’s body lines. All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws leave a smooth, flat surface that slides over rocks.
Key features
- Competition-style wheel opening for large tires
- Open toward the rear for wheelbase stretches
- Provisions for flush-mounted LED taillights
- 3/16-inch plate aluminum, CNC laser cut
- Countersunk bolt holes with stainless steel flat head cap screws
- Significant weight saving over standard crusher corners
Choosing wheel opening style
A comp cut wheel opening removes more of the rear corner than a standard crusher corner shape. That gives tires more room to flex on uneven ground, but it also leaves the rear of the body more exposed. Before choosing this style, think about how the Jeep is used. Daily driving on pavement needs less coverage than a trail rig that regularly climbs ledges and crosses ruts.
Before final mounting, test-fit the corners with the tires you plan to run and the suspension at full droop and full compression. Look for contact with the tub, the frame, the spare tire carrier and the fuel filler area. Cut in small steps, because removed metal cannot be added back. Plan taillight mounts before drilling so the wiring has room.
Corners of this style are often installed alongside related rear protection such as tire carriers, bumpers and taillight guards, since each part changes how the others load up. Check the fasteners periodically after the first trail outings.
- Test-fit with the tires you plan to run
- Check clearance at full suspension travel
- Plan taillight wiring before drilling
- Inspect fasteners after the first few trail runs
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 13-04-040-ALUM |
| UPC | 614901724127 |
| Corner type | Full |
| Material | 3/16-inch plate aluminum |
| Hardware | Stainless steel |
| Finish | Bare aluminum |
| Installation type | Cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
Poison Spyder lists these comp cut aluminum corners as a direct fit for the 1987–1995 Jeep Wrangler (YJ), including the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport models.
It fits the 1987–1995 Jeep Wrangler YJ in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims. Check fit against your vehicle’s year, model and trim before buying.
Installation notes
Installation requires cutting or drilling. Check the taillight provisions and the rear wheel opening before drilling. Bare aluminum can be finished or left raw.
What’s included
A set of bare aluminum comp cut crusher corners with stainless steel flat head cap screws.
Not included: the flush-mounted LED taillights, which are sold separately.












