Overview
The Performance Distributors 35100BK is a distributor cap and rotor kit with all brass terminals. It is made from a resin suited to DUI, Duraspark and breaker point systems, and it is sold for a 4.0L 6 cylinder engine.
The kit offers up to 50% higher dielectric strength and is designed to handle the full available voltage. Its rotor well design helps prevent burn-through.
Key features
- Up to 50% higher dielectric strength
- All brass terminals for conductivity
- Rotor well design that resists burn-through
- Resin suited to DUI, Duraspark and breaker point systems
Breaker points and DUI systems
Breaker point ignitions use mechanical points inside the distributor to switch the coil, while electronic systems such as DUI and Duraspark use a module in place of those points. A cap and rotor work the same way in each case, carrying high-voltage current from the coil to the plug wires in firing order, so the system type affects which parts of the distributor wear first.
Resin caps are commonly used for their resistance to tracking, but tracking still happens once the surface is contaminated with oil or moisture. Keep the cap and the distributor cavity clean and dry, and check the rotor tip for erosion each time you service the ignition.
- Clean the cap interior with a dry cloth
- Check the rotor tip for erosion
- Replace points and condenser together if fitted
Specifications
| Brand | Performance Distributors |
|---|---|
| Part number | 35100BK |
| UPC | 70000363703 |
| Contents | Cap and rotor |
| Terminals | All brass |
| Dielectric strength | Up to 50% higher |
| Engine | 4.0L 6 cylinder |
| Fitment | Universal Fit |
Vehicle fitment
The kit is universal fit and is sold for a 4.0L 6 cylinder engine. Confirm the year, make and model match your vehicle before ordering, and check the terminal layout and rotor against your distributor.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the cap to the ignition system you run, such as DUI, Duraspark or breaker point. Disconnect the battery before removing the cap.
What’s included
The kit consists of a cap and rotor. Plan separately for wires, hardware and the distributor body if they are needed.








