Overview
The Baer Brakes Dot4 High Performance Brake Fluid, part number 6110027, is a DOT 4 brake fluid packed in a 16.9oz (500ML) bottle. It is a specially formulated, high temperature fluid with a minimum dry boiling point of 608 degrees Fahrenheit. It is intended for everyday driving through high performance use. It is a universal fluid, so it is not tied to a specific vehicle.
The minimum wet boiling point is 383°F (195°C). The dry figure applies to new, moisture-free fluid, while the wet figure applies to fluid that has absorbed water, so both values matter when comparing brake fluids. Both figures are shown in Fahrenheit and Celsius. The fluid is DOT 4 and can damage painted surfaces, so keep it off paint.
Key features
- DOT 4 high performance brake fluid
- Minimum dry boiling point of 608°F (320°C)
- Minimum wet boiling point of 383°F (195°C)
- Formulated for everything from daily driving to high performance use
- Single 16.9oz (500ML) bottle
- Marked as damaging to painted surfaces
Understanding boiling points
Brake fluid is hygroscopic, meaning it slowly absorbs moisture from the air through hoses and seals. That water lowers the boiling point over time. Fluid that gets hot enough to boil under heavy braking can produce vapor bubbles, which compress under the pedal and leave the brakes feeling soft.
A high dry boiling point helps when the fluid is new, while the wet figure is a better guide once fluid has aged. Regular replacement keeps the system closer to its rated performance, and it matters most after hard driving, track sessions or long descents.
- Bleed the system after fitting new fluid
- Use fresh fluid from a sealed bottle
- Keep the reservoir cap closed to limit moisture entry
- Flush the full system rather than topping off old fluid
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6110027 |
| UPC | 844165055075 |
| DOT rating | DOT 4 |
| Minimum dry boiling point | 608°F (320°C) |
| Minimum wet boiling point | 383°F (195°C) |
| Bottle size | 16.9oz (500ML) |
| Quantity | Single bottle |
| Emission code | 6 |
| Damaging to painted surfaces | Yes |
| Pack | Each |
| Country of origin | USA |
Vehicle fitment
Brake fluid is a universal product rather than a vehicle-specific part, so no vehicle fitment list applies to this DOT 4 fluid.
The rating is DOT 4, so check that your vehicle’s brake system calls for DOT 4 fluid before using it.
Installation notes
Wipe any spill from painted parts immediately, since the fluid is marked as damaging to painted surfaces.
What’s included
One 16.9oz (500ML) bottle of Baer Brakes DOT 4 brake fluid.












