Overview
The Baer Brakes Spray Brake Cleaner, part number 6110028, is a non-chlorinated technical grade brake cleaner packed as a single 13oz (369g) aerosol can. It removes dirt, grease and other contaminants from brake parts including rotors, pads, calipers, drum brakes and other metal or metallic components. Since it is a chemical cleaner rather than a vehicle component, no particular make, model or year applies to it, and it can be used on any brake system the shop or owner works on.
The cleaner is mostly colorless and leaves no residue after its solvents evaporate, which suits parts that need to look clean and dry before the next step. It cleans and dries quickly, is 50 state legal, and has a low volatile organic compound level. The can is flammable and pressurized and is marked as damaging to painted surfaces, so direct the spray away from paint.
Key features
- Technical grade formula for brake system cleaning
- Strips dirt, grease and contaminants from rotors, pads, calipers and drum brakes
- Cleans and dries quickly
- Leaves no residue after the solvents evaporate
- Non-chlorinated and 50 state legal
- Low volatile organic compound level, emission code 6
- Spray tube included
Choosing a cleaner for brake work
A single aerosol can suits a quick job, such as cleaning one caliper or wiping down a set of rotors before pads go on. Buyers who work on several vehicles often keep a can at the bench and another in the toolbox, since it is convenient to have cleaner at the point of use. The spray tube helps place the solvent on the part without spreading it across painted areas.
Solvent cleaners only remove contamination; they do not restore worn friction material or a warped rotor. When cleaning before reassembly, inspect the surfaces for scoring, uneven wear or leftover residue, since contamination under a pad can cause noise and poor contact. Keep the cleaner away from rubber seals and boots, and wipe any drips from painted or plastic surfaces promptly.
- Good for quick cleaning before pad or rotor installation
- Use the spray tube to aim the solvent
- Inspect cleaned parts for scoring or uneven wear
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6110028 |
| UPC | 90127964590 |
| Grade type | Technical |
| Can size | 13 |
| Can type | Aerosol |
| Container size | 13oz (369g) |
| Pack | Each |
| Non chlorinated | Yes |
| 50 state legal | Yes |
| Flammable | Yes |
| Pressurized | Yes |
| Damaging to painted surfaces | Yes |
| Emission code | 6 |
| VOC level | Low |
| Volatile organic compound percentage | 10 |
| Spray tube included | Yes |
| Country of origin | USA |
Vehicle fitment
This is a universal chemical cleaner and not a vehicle-specific part, so there is no fitment list to check.
Because the cleaner is not made for a particular vehicle, year, model and trim do not limit its use. Keep the spray off painted body panels, since the can is marked as damaging to painted surfaces.
Installation notes
Point the spray tube at the component being cleaned rather than at paint or trim. Keep the can away from open flames and sparks, since it is flammable and pressurized.
What’s included
One 13oz (369g) aerosol can with a spray tube.













