Overview
The Performance Distributors C9076 is an HEI LiveWires spark plug wire set with 8.00 mm diameter wires, sold under part number C9076. The wires are custom made so they fit without assembly, with each end numbered for correct cylinder placement.
The wires use space age heat resistant sleeving to guard against exhaust heat, plus a durable silicone jacket and insulation. A spiral wound core is used to prevent electronic interference, and the swivel boots are easy to work with. Universal fit is listed, but no vehicle is named.
Key features
- Space age heat resistant sleeving for protection from exhaust heat
- Durable silicone jacket and insulation
- Spiral wound core to prevent electronic interference
- Swivel boots that are easy to work with
- Numbered ends for correct cylinder placement
- Custom made, with no assembly required
Routing and cylinder order
Numbered plug wires make it easier to match each lead to the right cylinder when the engine is apart, but the numbers only help if you route the set before fully tightening the boots. Work from the cylinder closest to the distributor outward, and keep the wires separated so none cross over the coil or rub against the valve cover. A slow, careful routing pass prevents most early swaps.
Spiral wound cores and silicone insulation are used to reduce electronic interference and handle heat, so keep the wires off exhaust manifolds and away from moving belts. Wires that feel stiff or show cracks at the boot should be replaced rather than bent into position. Replace the cap and rotor when they show wear, since a worn cap can undo the benefit of new wires.
- Route wires before tightening boots
- Keep leads apart at the coil
- Inspect for cracking at the boot ends
Specifications
| Brand | Performance Distributors |
|---|---|
| Product line | HEI LiveWires |
| Part number | C9076 |
| UPC | 70000428406 |
| Wire diameter | 8.00 mm |
| Sleeving | Space age heat resistant |
| Jacket and insulation | Durable silicone |
| Core | Spiral wound |
| RFI suppression | Included |
| Type | Direct fit |
| Fitment listed | Universal fit |
Vehicle fitment
Universal fit is the only fitment label for these wires. Confirm fit for your vehicle’s year, model and engine before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Each end is numbered, so match the numbers to the cylinder positions as you route the wires.
What’s included
No assembly is required, since the wires come custom made. Count the wires and hardware against your installation before starting.









