Select your vehicle

Performance Distributors DUI Distributor – 40820

Performance Distributors

Shop Performance Distributors on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Performance Distributors DUI distributor, part 40820, drop-in electronic HEI type
  • Fits 1967-91 Jeeps and AMC cars with 290, 304, 343, 360, 390 and 401 V8 engines
  • Internal coil and module with one-wire hook-up and optional tach connection
  • Includes a 50,000 volt coil and Dyna-module, with a one year warranty

Description

Overview

The Performance Distributors DUI 40820 is a drop-in electronic HEI type distributor for 1967-91 Jeeps and AMC cars. It carries its coil and ignition module inside the unit and runs from a single 12-volt feed. It is made for 290, 304, 343, 360, 390 and 401 V8 engines.

Each unit is curved on a distributor machine to meet the timing demands of Jeep engines. The company says each one is hand assembled to exact tolerances and lubricated where necessary, rather than mass produced.

Key features

  • Produces 50,000 volts under load during acceleration, aimed at preventing spark drop-off
  • Curved on a distributor machine for Jeep engine timing
  • Hand assembled to exact tolerances and lubricated where necessary
  • Internal coil and module with a simple one-wire hook-up
  • Optional tach hook-up
  • Upper and lower bushings for durability
  • Allows wider plug gaps and gives instant throttle response

Setting up the ignition

A drop-in distributor replaces the whole trigger and coil path, so the engine’s timing and advance curve depend on how the unit is set up. Electronic HEI-type units avoid the points and condenser wear found in older systems, which can make a noticeable difference on an older engine. Set base timing with a timing light after installation, and check that the tach connection is wired correctly if one is used.

Before installing, check the distributor gear and shaft for wear, since a worn drive gear can cause timing to drift. Clean the cap and inspect the wires for cracks or corrosion. Plug gap, spark plug condition and the coil connection should be checked as part of the same job. Keep wiring tidy and away from hot exhaust parts.

  • Base timing set with a timing light
  • Drive gear and shaft wear check
  • Spark plug wires inspected for cracks

Specifications

Brand Performance Distributors
Part number 40820
UPC 70000363706
Distributor type HEI
Advance type Electronic
Engine applications 290, 304, 343, 360, 390 and 401 V8
Vehicle coverage 1967-91 Jeeps and AMC cars
Coil 50,000 volt, internal
Warranty One year

Vehicle fitment

It fits 1967-91 Jeeps and AMC cars with the V8 engines named above, with a universal fit. Model years outside 1967 to 1991 are not covered. Confirm your engine and model against the year range before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Hook-up is one 12-volt wire with an optional tach connection. Disconnect the battery before swapping an ignition distributor.

What’s included

The unit includes the internal coil and Dyna-module, with a 50,000 volt coil. It carries a one year warranty.

SKU: P/D40820 Category:

Specification

Shipping weight 6.80 lbs
Package dimensions 18.30 × 11.00 × 8.00 in
brands

Questions & Answers

Is the Performance Distributors 40820 made for Jeeps?

Yes. It is made for 1967-91 Jeeps and AMC cars with 290, 304, 343, 360, 390 and 401 V8 engines. Each unit is curved for Jeep engine timing, so it suits Jeep builds in that range.

Which vehicles does the 40820 fit?

It fits 1967-91 Jeeps and AMC cars with 290, 304, 343, 360, 390 and 401 V8 engines. Confirm your model and engine against the year range before fitting.

Does the 40820 produce more voltage under load?

Yes. The internal coil produces 50,000 volts under load during acceleration, which helps prevent spark drop-off. The unit uses no resistor for added voltage.

Is there a warranty on the 40820?

Yes. A one year warranty applies. Each unit is hand assembled to exact tolerances and lubricated where necessary, rather than mass produced, so check the coverage terms before fitting.

How do I know when a distributor needs replacing?

Look for hard starting, rough idle, or misfires that follow engine speed, since those often point to a failing ignition component. Check the cap, rotor and wires before replacing the distributor, because they wear and can mimic a bad unit.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Performance Distributors on Amazon