Overview
The Oracle Lighting Vector Pro Series Full LED Grille (flat black, part 5837-PRO) is a full replacement grille for the Jeep Wrangler JL and Gladiator JT. It integrates LED light emitters for the low beam, high beam and a dynamic LED DRL. Oracle lists 5,600 combined (raw) lumens for the low beam and 7,200 combined lumens for the high beam.
Each LED emitter can be adjusted independently, so the low beam can put focused light on the road without blinding oncoming traffic. That matters most on lifted Wranglers. The separate driving and low beam lights are designed to give proper light distribution.
Key features
- Full replacement grille with integrated LED emitters
- 5,600 combined lumens low beam, rated by Oracle
- 7,200 combined lumens high beam
- Independently adjustable LED emitters
- Separate driving and low beam lights
- DRL module sealed to IP68
- Flat black finish
Headlight aim and wiring checks
A full LED grille changes where the light lands, so headlight aim should be checked once the install is finished. Park on level ground about a few car lengths from a wall, then compare the beam cutoff to the height mark on the wall. Lifted vehicles often need a fresh aim check because the ride height changes where the light falls.
Wiring work for headlights and DRL modules is easiest when the harness is routed cleanly and each connector is fully seated. Keep the harness away from the cooling fan and sharp edges, and inspect the connectors after rough trail use or heavy washing. Check local rules for auxiliary and headlight equipment before relying on any change.
- Check beam aim on level ground after installation
- Seat every connector fully and secure the harness
- Recheck aim after changing ride height
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 5837-PRO |
| Type | Full replacement grille with LED lighting |
| Finish | Flat black |
| Low beam output | 5,600 combined lumens (raw lumens) |
| High beam output | 7,200 combined lumens |
| Ratings | DRL module sealed to IP68 |
| Wiring | Plug and play headlight harness adapter; fused DRL wiring adapter |
Vehicle fitment
This grille fits the 2018 to 2026 Jeep Wrangler JL and the 2020 to 2026 Jeep Gladiator, across the trims and editions it is made for. Confirm your vehicle’s year, model and trim before ordering.
Years and models outside the Wrangler JL and Gladiator JT lists, including the Wrangler JK, are not covered by this grille.
Installation notes
The headlight wiring connects through the plug and play harness adapter, which plugs into the factory socket. The DRL module wires into the fuse box through the fused wiring adapter. Installation takes one to two hours for most beginners and needs only basic tools.
What’s included
The full LED grille, the plug and play headlight harness adapter and the fused DRL wiring adapter.















