Overview
The Oracle Lighting Universal Illuminated LED “O” Letter Badge (matte white, part 3140-O-001) is a single edge-lit letter O for building a glowing vehicle badge. The matte white housing is the finish that sets this letter apart from the matte black letters in the same range. When turned on, it gives off a soft edge-lit glow, and the housing keeps a clean look when off.
Measuring approximately 3.75 inches wide, 1.4 inches tall and 0.5 inch thick, the letter draws less than 0.1 amp. It attaches with VHB double-stick adhesive, and Oracle recommends its VHB Primer (part 2082-504) for the strongest bond. The wire runs to a 12V source, such as the parking lights, an ignition fuse or a toggle switch.
Plan the layout first. Lay out the letter on the surface, mark the wire route and confirm the wire can reach a 12V source before any adhesive is applied. Each vehicle’s needs are different, so each badge needs its own plan.
Key features
- Matte white housing
- Soft edge-lit glow when on
- Clean housing look when off
- Draw of less than 0.1 amp per letter
- VHB double-stick adhesive
- 12V wiring options
Finish and contrast
The matte white finish shows up more against dark paint and less against white or light panels. Look at the finish in the spot where the letter will sit before choosing it, since the surface color changes how the badge reads. A matte finish also softens reflections, so the letter is easier to see in bright sun without looking shiny.
Test the glow before final placement. Connect the wire to the chosen 12V source, turn the letter on and confirm it lights evenly across the edge. Check that the wire has enough slack at the mounting point and that the route stays clear of moving parts such as doors and hood hinges. Once the adhesive is pressed, repositioning it is hard, so take the time to test first.
- Check contrast against the panel color
- Test the glow before pressing adhesive
- Keep the wire clear of doors and hinges
- Clean the surface with alcohol before mounting
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 3140-O-001 |
| Letter | O |
| Finish | Matte white |
| Size | Approximately 3.75 in wide, 1.4 in tall, 0.5 in thick |
| Current | Less than 0.1 amp per letter |
| Voltage | 12V |
| Mounting | VHB double-stick adhesive |
| Primer | VHB Primer, Oracle part 2082-504 |
Vehicle fitment
The letter O is a universal accessory, made for cars rather than one specific vehicle. Test the position and wire route on your vehicle before final placement.
Installation notes
Apply VHB primer to the mounting surface before setting the letter. A hole may be needed for the wire, and each vehicle’s needs will be different, so plan the wire route first.
The letter comes in matte white.
What’s included
One illuminated LED letter O in matte white, with its wire and VHB double-stick adhesive.















