Overview
The Oracle Lighting 2012-002 is a blue, pre-wired on/off flush mount LED switch that runs on 12 volts and fits a 16MM mounting hole. It is a push-button switch whose power ring glows when the circuit is activated, so the on or off state is visible at a glance in low light.
It suits owners adding illuminated accessory controls to an interior panel. Pre-wired terminals make the hookup simpler than bare switches. No vehicle years, makes or models are named, so this is not a vehicle-matched part.
Key features
- Blue illuminated power ring that glows when the switch is activated
- Pre-wired terminal for a simpler installation
- Mounts flush in a 16MM hole
- Heavy-duty brass assembly with a click you can feel when engaged
- Durable nickel-plated finish; CE compliant
Wiring a switched accessory
A flush switch like this one sits between a switched feed and the accessory it controls. The feed should come from a circuit that is fused and switched, so the accessory can be shut off without disconnecting the battery. Route the wires away from heat sources and moving parts, and secure them with clips so the terminal does not take strain when the panel is pushed back into place.
Plan the panel layout before drilling. Keep the switch away from edges, seams and any spot where a hand or cargo could catch it. Test the switch on the bench first so you know the click and the power ring work before the panel is fastened in the vehicle.
- Use a fused, switched 12-volt feed
- Keep wires clipped away from moving parts
- Bench-test the switch before final mounting
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 2012-002 |
| UPC | 201200220148 |
| Illumination color | Blue |
| Switch type | Push button, on/off |
| Operating voltage | 12 volts |
| Mounting hole | 16MM |
| Assembly | Heavy-duty brass |
| Finish | Durable nickel plate |
| Waterproof | No |
| Certification | CE compliant |
Vehicle fitment
It is sold as universal fit, so it is not tied to a specific year, make or model. Fit depends on whether your panel can take a 16MM flush mount.
No specific vehicles are named, so there are no close models to rule out. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The pre-wired terminal has to be connected to a switched 12-volt feed. Fuse that feed and confirm the wiring matches the circuit before connecting it.
What’s included
One pre-wired blue on/off flush mount LED switch with its power ring. No other hardware is named for this part.
Not included: The 16MM mounting hole, which must be prepared in the panel.









