Overview
The Crown Automotive Stop Light Switch, part number J0931216, is a replacement brake stop light switch with a blade-style terminal. It fits 1966 to 1972 Jeep CJ5 and CJ6 models, the 1966 to 1968 CJ5A and CJ6A, and the Jeep Commando and Jeepster.
Crown Automotive describes itself as a replacement parts company for Jeep vehicles, with more than 8,000 part numbers, including factory-discontinued items. The switch carries that catalog number, which can be matched to the listed models.
Key features
- Blade-style terminal
- Replacement stop light switch for the listed Jeep models
- Crown part number J0931216
Testing the stop light circuit
A stop light switch closes when the brake pedal moves, sending power to the brake lamps and sometimes to other systems that rely on the brake signal. On older Jeeps the switch is mounted at the brake pedal arm or master cylinder bracket, where it sees the pedal travel directly. When the lamps stay on or fail to light, the switch is one of the first parts to check, along with the bulbs, fuses and ground.
Testing is simple with a test light or multimeter. With the key on, press the pedal and confirm voltage at the switch output, then release the pedal and confirm the circuit opens. Replace the switch if it shows no change, if the connector is corroded, or if the plunger sticks. Clean the connector and check the wiring before assuming the switch is at fault.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0931216 |
| UPC | 848399055054 |
| Terminal style | Blade |
| Function | Stop light switch |
Vehicle fitment
It fits these Jeep models: 1966 to 1972 CJ5 (Base), 1966 to 1968 CJ5A (Base), 1966 to 1972 CJ6 (Base), 1966 to 1968 CJ6A (Base), 1966 to 1972 Commando (Base) and 1966 to 1971 Jeepster (Commando).
Years and models outside the list above, including the Wrangler and Cherokee, are not covered by this part.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is one stop light switch with a blade-style terminal.









